Instructions / Assembly

A spa filled with water is very heavy. Existing decks and
concrete patios must be inspected by a licensed contractor
to determine adequate support. Your base must have a
minimum of 150 pounds per sq. ft. load bearing capacity. Add
additional bracing if necessary.
Place the spa on an elevated foundation so that water drains
away from it. Proper drainage will keep components
protected from rain and wet weather.
New concrete patios must be a 4” minimum depth with
reinforced wire placed in the concrete.
New wood decks should have (2 x 10) floor joists and (4 x 4) or
(6 x 6) post depending on deck height. Consult a structural
engineer or contractor to ensure the proper support for the
height and size of your deck.
We do not recommend placing your spa on a brick, stone, or
gravel base.
DO NOT place your spa on bare ground!
10