Use and Care Manual

1
Phase 1: Filling the Spa
1. Fill Spa with water.
The spa should be allowed to fill until the water level is at the center of
the skimmer. If using a garden hose, allow it to run for several minutes
to avoid introducing bacteria that may be living in the hose.
2. Add First Step to eliminate staining.
As the spa fills, add First Step to prevent build up of minerals
on the spas surface. Add one bottle per 500 gallons of water.
This should be allowed to circulate in a filled spa for 60
minutes before proceeding to Phase 2. A bottle of First Step is
included in the Spa Breeze Starter Kit.
5