User`s manual

46
qbex aero style / User’s guide
47
Peripherals
qbex aero style / User’s guide
7
Install the new WLAN module in the WLAN
slot.
Install the screw which is removed in step 5,
WLAN module is locked.
Connect the antenna line to WLAN module.
8
9
WLAN Module
Antenna Line
Tip
There are usually two connectors to connect
the antenna line in WLAN module. If there is
only one antenna line, please
connect it to the connector which “MAIN” is
indicated in the side of the module.
10
Install the memory module cover and lock with
the screw.
Connecting External
Display
1
The Display Output Port ( ) on the Notebook is connected with the cable of the external display.
Notice
*When external display is connected Click [Start],click [Control Panel] ,and then pick
[Appearance and Themes] category, Click [Display] for the advanced setting.
Simultaneous Notebook LCD/external display is only supported in the Notebook LCD
panel’sdefault resolution. The external display (monitor,LCD projector/panel) must be
capable of displaying the same resolution as the Notebook.
Tip
Press + to toggle between the Notebook’s LCD display
and an external monitor in this sequence:
1 Notebook LCD only
2 CRT(External Monitor) only
3 LCD+CRT Clone
Fn F3
Display Output Port