User`s manual

38
qbex aero style / User’s guide
39
Peripherals
qbex aero style / User’s guide
Connecting AV
Equipments
Connecting Microphone
Connect the microphone plug to the microphone jack
on the Notebook. This will make the Notebook to record
voice and sound.
*Ensure the Notebook is not in “Speaker
Mute” mode before you use microphone.
*Please purchasing the microphone with
mini-pi n plug.
*If the microphone is close to the speaker,
sometimes they will produce resonance
and occur the howling sound. You can move
the microphone away from the speaker, or
use Volume Control to reduce the level of
system sound to prevent this phenomenon.
Tip
Connecting Headphone
Microphone Jack
Headphone Jack
Tip
Please purchasing the headphone
with mini-pin plug.
Using USB Compatible
Peripherals
Must Know for USB
Connection
Before connection, please install the driver of USB
device.
*Ensure the specic direction for plugging USB cable.
DO NOT force to plug the cable into the port.
*Plural USB ports are located in the Notebook, you can
choose the port you want to use.
*If you need more USB ports, you can connect a USB
hub to increase the ports.
Connecting USB Compatible
Peripherals
1
Plug the USB cable into the USB port of the
Notebook
After plugging the USB cable, the “Found New
Hardware Wizard” will appear.
2
Follow the instruction of the wizard until [Finish]
button appears. It means the USB connection setting is
done.
If the wizard doesn’t pop up,
please unplug the USB cable
and plug it again after 3
The specic USB drivers is
required, if it is not built in this
USB device.
Notice
3
Click [Finish] button.
Depends on what USB device you connect, the
software installation may be required later.
Notice
You can use the USB
device immediately, when
plug it into the USB port
next time.
* If the USB device is
connected to the different
USB port, the “Found New
Hardware Wizard” will
appear. Please follow the
steps above to do the
setup again.
USB Port