User`s guide

15
qbex aero style / User’s guide
4. Getting Started
4-1 Connecting the Power Adapter
The Notebook PC comes with a universal AC-DC adapter and the allowable input voltage of adapter is from
100V to 240V.
Following the below steps to connect the adapter:
1.Take the adapter and the power cord, and then connect the adapter with the power cord.
2.Plug the DC end of adapter into the power jack of the Notebook PC.
3.Insert the AC end to the wall outlet
4.Check the connections above correctly before turning on the Notebook PC.
DO NOT remove the Notebook PC if the SSD is being read or written,
that may result in the loss of the data and the damage of the disk.
Follow the system steps to turn off the Notebook PC.
Forbidding
!
The connection between Internet and your Notebook PC
will be interrupted when the system enter the hibernation
mode.
Importance
DO NOT remove the SSD immediately while or after
operating. Set the Notebook PC into the Standby mode or
Hibernation mode, before moving it.
CAUTION
4