User's Manual

already open and the netgate, DNS and relevant setting have

been made, then it will connect to Internet

automatically.(Ethernet card function must be selected already)

4. If this device fails to connect, usually the reason is

something is wrong with setting in router. You can set the

parameters in this device as follows:

a. Enter setting/Eterhnet setting, select and open Ethernet.

Enter configuration information, choose “static IP setting, enter

static IP setting interface (default is automatic aquiring IP,

usually automatic aquiring IP is OK for all, but some

companies’router will use specified IP, not allowing aotomatic

aquiring IP, it depends on router setting, static IP needs to be

used at this time.)

b.There is no need to fill in the Ethernet card device and

physical address. Player will detect automatically after

connecting Ehternet successfully.

In the IP address column enter the IP address, usually default is

192.168.1.1xx.

c.in “subnet mask”, enter network segmentmask,default is

255.255.255.0