User's Manual

switch on the “Ethernet”, there will be a network icon in the

status column at this time.

3.Hold on for moment, this device will try to connect to

Internet automatically, if the router, the DHCP service is

already open and the netgate, DNS and relevant setting have

been made, then it will connect to Internet

automatically.(Ethernet card function must be selected already)

4. If this device fails to connect, usually the reason is

something is wrong with setting in router. You can set the

parameters in this device as follows:

a. Enter setting/Eterhnet setting, select and open Ethernet.

Enter configuration information, choose “static IP setting, enter

static IP setting interface (default is automatic aquiring IP,

usually automatic aquiring IP is OK for all, but some

companies’router will use specified IP, not allowing aotomatic

aquiring IP, it depends on router setting, static IP needs to be

used at this time.)