User's Manual

4
1 Caring the ALL-IN-ONE PC
The ALL-IN-ONE PC is a precision device; the error operation may damage the
device.
1-1 LCD Screen
LCD Screen is the most delicate component of the UNIT and comprised of thin glass.
It may be broken up by external abrupt force. DO NOT scratch the cover of the UNIT, or
the scrape on the cover cannot remove.
DO NOT cover the LCD Screen strongly, or else damage may occur.
DO NOT place objects on the keyboard to avoid damaging the screen and
keyboard when you cover the LCD Screen.
Place the UNIT in carrying case to protect it from dirt, water, shock and scratches
before traveling.
DO NOT drop or place heavy objects on the LCD Screen.
DO NOT scratch the LCD Screen with your fingernails or any hard objects.
Use a soft and lint-free cloth to wipe your UNIT and wipe it gently in order to avoid
damaging the LCD Screen.
Shut down the LCD Screen, if the UNIT will not be used for a long time.
DO NOT clean the LCD Screen with chemical cleaners.
The LCD Screen DOES NOT come into contact with hard objects (E.g.: cloth button,
watchband).
Use a soft and lint-free dry cloth to wipe the LCD Screen smoothly. DO NOT use
your hand to wipe the LCD Screen directly.
DO NOT spill liquid into the UNIT as it can damage the components of the UNIT.
Cover the LCD Screen smoothly in order to avoid moving the hinges and flashing
the LCD Screen.
DO NOT clean the Touch Pad with acidic cleaner or spray cleaning solution
directly on the UNIT.
1-2 Other accessories
Following the below steps before cleaning your UNIT and the accessories.
1. Turn off the UNIT. Disconnect your UNIT and all external devices from their
electrical outlets and remove the installed battery.
2. Use the little dust collector to pump the dust from the slot of plug or keyboard.
3. Moisten a soft, lint-free cloth with water and wipe the surface of the UNIT smoothly.
DO NOT seep liquid into the UNIT in order to avoid shorting of circuit and the
damage of the UNIT.
4. Turn on the UNIT after drying it.