User manual

Exterior influence, for example
lightning, static electricity and so
on, which are possibly to disturb
the normal operation of this
machine.
Can not operate this
machine.
CAUTION: Don't let your machine display the same picture for a long time, please set up a screen protection
If a high contrast picture remains for along time, this picture will bring a 'leave shadow' in screen. Usually the 'leave
shadow' will disappear gradually when you turn off the machine power. However, this trouble can't be repaired , Which
isn't in range of warranty.
procedure.
Electrical release at turning off.
It is normal.
Noise Signals at turning off.
Remote control distance is
short, lose control.
1. Receive window of remote
control was covered by objects.
2. The battery energy of remote
control is to low.
1. Remove objects, obstructing the receiver
window of remote control.
2. Change battery.
Computer display is faint.
1. Adjustment is incorrect.
2. Display mode is incorrect.
1. Use auto-adjustment function.
2. Use recommended mode.
Computer display image
does not fill the screen.
1. Adjustment is incorrect.
2. Display mode is incorrect.
1. Use Auto-adjustment function.
2. Enter to adjust horizontal or
vertical position.
3. Use recommended mode.
"PICTURE"
Symptom
Factor
Solution
Press " " button to turn off electrical source,
then press " " button to turn on the TV again
after 1-2 minutes.
35
19L11A / 22L11A / 23L11 共用 中性英 文说 明书(欧 洲模数)(MSD 306方案 ）