User manual

press ''Right'' key to cancel operation.

MOVE: After selecting channel press ''Green'' key, MOVE icon appears behind the channel which you select, and press

''Green'' key again to cancel it. Press ''Up/Down'' key to select the channel position that you'd like to move, then press

''OK'' key to confirm. You also can press ''Menu'' key to return main menu.

SKIP: After selecting channel press ''Blue'' key, SKIP icon appears behind the channel which you select, press ''Blue''

key again to cancel it. Press ''MENU'' key to return main menu.

Favourite: After choosing channel press ''Yellow'' key, Favourite icon appears behind the channel which you select,

press ''Yellow'' key again to cancel it. Press ''MENU'' key to return main menu

Signal Information

Press the ''MENU'' key, CHANNEL menu shows on the screen. Press ''Up/Down'' key to select Signal Information.

Press ''OK'' key to enter into Signal Information menu. You can look through signal information.

CI Information

Press the ''MENU'' key, CHANNEL menu shows on the screen. Press ''Up/Down'' key to select CI Information. When

you insert the CI card, press ''OK'' key to enter into CI Information menu. You can look through CI information.

Note: Before you press the MENU button, please select the input source first. Only in DTV and ATV mode you can

change it.

Software Update(OAD)Off

Open or close software update function by pressing “Ok”key on the remote control.

Select Channels with "CH+/CH-" Key

Press Program key on the remote control or "CH+/ CH-" key on the panel to select the channels.

Select channels with the Return key : you can go to the last channel when pressing the Return key. For example, if the

last channel is 10 and the current channel is 20, you will go to channel 10 when pressing the Return key. You can switch

the two favourite channels as you like.

19L11A / 22L11A / 23L11 共用中性英文说明书(欧洲模数)(MSD 306方案）