Tus neeg siv phau ntawv

9
CALL HANDLING FROM THE BASE
+ Place a Call: On the touch screen, Tap the card of the device you want to make the call from.
or Tap
Enter the number you want to call.
Tap
+ Answer a Call: Tap
+ End a Call: Tap
+ Reject a Call: Tap
+ Silence a Call: Tap
+ Hold a Call: Tap
+ Resume Held Call: Tap RESUME.
+ Adjust Volume: Tap or
+ Mute/Unmute Microphone: Tap
NOTE: You can also Mute/Unmute the microphone, by raising and lowering the microphone boom.
An audible announcement is heard to indicate “Muted” or “Unmuted” status.
Mute indicator lights illuminate when mute is active.
+ Place a Second Call: Tap and then Tap New Call.
3 Speaker
4 Microphone
1 Power LED
2 Touch Screen
IMPORTANT: When using MaX UC, all call control must be done from the MaX UC application and not from the headset or
base.
Need support? Connect with us at www.northland.net/support or
Dial 4357 (HELP) or 315-671-6262 to speak to a Northland Representative