Tus neeg siv phau ntawv

8
CALL HANDLING FROM THE HEADSET
+ Answer a Call: Press the Call Control button or undock the headset.
NOTE: Auto Answer must be turned on to answer the call by undocking the headset.
+ End a Call: Press the Call Control button or dock the headset.
+ Reject a Call: Double-press the Call Control button.
+ Hold a Call: Hold the Call Control button for two seconds.
+ Resume Held Call: Hold the Call Control button for two seconds.
+ Adjust the Volume: Press the Volume Control button up/down.
+ Mute/Unmute: Press the Mute button.
NOTE: You can also Mute/Unmute the microphone, by raising and lowering the microphone boom.
An audible announcement is heard to indicate “Muted” or “Unmuted” status.
Mute indicator lights illuminate when mute is active.
Mute Button
Call Control Button
Status and Busylight LED
Volume Down Control
Volume Up Control
IMPORTANT: When using MaX UC, all call control must be done from the MaX UC application and not from the headset or
base.
Need support? Connect with us at www.northland.net/support or
Dial 4357 (HELP) or 315-671-6262 to speak to a Northland Representative