Phau Ntawv Qhia

Page 5 of 8
Radio Install
● Install two double threaded bolts
in back of radio with 7mm wrench
● Place radio and dash kit from the
front side of the dash
● Position rear bracket and loosely
install the two nuts on back of
radio
Loosely install four High-Low
threadforming screws with a T25
Torx
Position radio in opening moving
left and right and up, and down,
once happy, tighten the nuts on
the back of the radio with a 7mm
wrench and T25 Torx on the
bracket