Owner's manual

T = Standard
S = Solder Dip (*)
Output frequency
Frequency vs. Temperature Code:
1 = ± 100ppm at 0ºC to +70ºC
4 = ± 50ppm at 0ºC to +70ºC
5 = ± 25ppm at -20ºC to +70ºC
6 = ± 50ppm at -55ºC to +105ºC
9 = ± 50ppm at -55ºC to +125ºC
10 = ± 100ppm at -55ºC to +125ºC
11 = ± 50ppm at -40ºC to +85ºC
12 = ± 100ppm at -40ºC to +85ºC
14 = ± 20ppm at -20ºC to +70ºC
15 = ± 25ppm at -40ºC to +85ºC
Screening Options:
Blank = No Screening
M = Per MIL-PRF-55310, Level B
T = Standard
S = Solder Dip (*)
Output frequency
Frequency vs. Temperature Code:
1 = ± 100ppm at 0ºC to +70ºC
4 = ± 50ppm at 0ºC to +70ºC
5 = ± 25ppm at -20ºC to +70ºC
6 = ± 50ppm at -55ºC to +105ºC
9 = ± 50ppm at -55ºC to +125ºC
10 = ± 100ppm at -55ºC to +125ºC
11 = ± 50ppm at -40ºC to +85ºC
12 = ± 100ppm at -40ºC to +85ºC
14 = ± 20ppm at -20ºC to +70ºC
15 = ± 25ppm at -40ºC to +85ºC
Screening Options:
Blank = No Screening
M = Per MIL-PRF-55310, Level B
T = Standard
S = Solder Dip (*)
Output frequency
Frequency vs. Temperature Code:
1 = ± 100ppm at 0ºC to +70ºC
4 = ± 50ppm at 0ºC to +70ºC
5 = ± 25ppm at -20ºC to +70ºC
6 = ± 50ppm at -55ºC to +105ºC
9 = ± 50ppm at -55ºC to +125ºC
10 = ± 100ppm at -55ºC to +125ºC
11 = ± 50ppm at -40ºC to +85ºC
12 = ± 100ppm at -40ºC to +85ºC
14 = ± 20ppm at -20ºC to +70ºC
15 = ± 25ppm at -40ºC to +85ºC
Screening Options:
Blank = No Screening
M = Per MIL-PRF-55310, Level B
T = Standard
S = Solder Dip (*)
Output frequency
Frequency vs. Temperature Code:
1 = ± 100ppm at 0ºC to +70ºC
4 = ± 50ppm at 0ºC to +70ºC
5 = ± 25ppm at -20ºC to +70ºC
6 = ± 50ppm at -55ºC to +105ºC
9 = ± 50ppm at -55ºC to +125ºC
10 = ± 100ppm at -55ºC to +125ºC
11 = ± 50ppm at -40ºC to +85ºC
12 = ± 100ppm at -40ºC to +85ºC
14 = ± 20ppm at -20ºC to +70ºC
15 = ± 25ppm at -40ºC to +85ºC
Screening Options:
Blank = No Screening
M = Per MIL-PRF-55310, Level B
3
Q-TECH Corporation - 10150 W. Jefferson Boulevard, Culver City 90232 - Tel: [phone] - Fax: [phone] - www.q-tech.com
QT93W and QT93P SERIES
HIGH-RELIABILITY LVPECL OR LVDS MINIATURE CLOCK OSCILLATORS
2.5 to 3.3Vdc - 40MHz to 320MHz
Q-TECH
CORPORATION
QT93W & P (Revision E, October 2010) (ECO #10000)
Ordering Information
Packaging Options Other Options Available For An Additional Charge
Frequency stability vs. temperature codes may not be available in all frequencies.
For Non-Standard requirements, contact Q-Tech Corporation at [e-mail]
Specifications subject to change without prior notice.
• Standard packaging in anti-static plastic tube (60pcs/tube)
• Tape and Reel (800pcs/reel) is available for an additional
charge.
• (*) Hot Solder Dip Sn60 per MIL-PRF 55310
• P. I. N. D. test
(MIL-STD 883, Method 2020)
3.3Vdc LVDS 2.5Vdc LVDS
3.3Vdc LVPECL 2.5Vdc LVPECL
QT 93LW 9M-25 0. 000MH z
QT 93 LW 9M-250.000MHz
Sample part number
QT 93NW10M -125.00 0M Hz
QT 93 NW 10 M-125.000MHz
Sample part number
QT 93LP1M- 106.250 MH z
QT 93 LP 1M-106.250MHz
Sample part number
QT 93NP4M- 100.000 MH z
QT 93 NP 4M-100.000MHz
Sample part number