User`s manual

User’s manual of remote client software
Then go on the decode channel configuration. Select a channel on the left and pull into the display
area, so this channel can be played in this decode output of this area. If the resolution is CIF, the
most channels can be setup at one time are: 4 times the number of 4002MD or 8 times the number
of 4004MD; if the resolution is D1, the software can output the lest channels: 2 times the number
of 4002MD or 4 times the number of 4004MD.
Suggestion: the user had better setup the 4 output with CIF resolution or 2 output with D1
resolution for one 4002MD or 8 output with CIF resolution or 4 output with D1 resolution for one
4004MD, avoiding output error.
Right click can clear all the configuration in this area.
Fig 2.5.48
When you are configuring none second output, if you right click the information in the list, it
can be delete, move up and down to adjust the play sequence. If modify the D1 resolution, the
software should be reboot to make it into effective. About the other configuration you just need to
re-play. If several channels in this area, it can be cycle played when you are previewing image
after you select the “cycle play” in the local configuration. Take the picture above for an example,
in the time of cycle play, play the first channel at first time, play second channel at second time
and so on.
- 58 -