User`s manual

User’s manual of remote client software
Fig 2.5.16
2.5.2.1 Play mode
You can select the following play mode:
 Software decode but not cycle (default mode).
 Software decode with cycle mode (enable cycle mode option). You must input cycle
time.
 Use hardware decode (select Hardware decode) without cycle mode.
 Use hardware decode (select Hardware decode) with cycle mode (select cycle play).
Here you need to define “cycle play time”, we suggest the period is more than 20S.
Hardware decode will turn digital video into analog video to build TV wall.
Hardware decode mode: preview with TV wall, not preview but TV wall.
Preview performance: “Throw no frame”, “Throw one B frame” and “Throw two B frames”.
Network performance: “The least latency”, “The least latency”, “Less latency, more fluency”,
“The most fluent”.
The alarm output delay time is between 5s to 100s.
2.5.2.2 Client record mode
Client software can save the live stream from DVR via network.
Please select recording start HDD and end HDD.
If you enable “Cycle recording”, when there is not space in PC HDD, client software will
- 30 -