User`s manual

User’s manual of remote client software
Select one channel in the right column, if click “<<” button the channel will be delete; if
click “up” or “down” button, the sequence of the channel will be adjusted, and the channel play
sequence in the group network preview will also be adjusted.
2.5.1.7 Delete server
In left column of Fig 2.5.9, select one DVR, right click and select “delete node”. Press “OK”
in the popup warning message box to delete DVR and press “Cancel” to cancel deleting.
If the DVR is deleted, the related DVR channels and channel that in the group will be deleted.
2.5.1.8 Modify DVR parameters
In left column of Fig 2.5.9, select one DVR, double click. In the popup DVR properties
dialog box, you can change the DVR properties. Click “OK” to finish modification. But the
related channel in the right window and group will be delete.
2.5.1.9 Modify channel properties and network preview protocol
In Fig 2.5.10, select one channel and double click, in the popup dialog box shown as Fig
2.5.14, you can modify the camera properties, also you can select stream type (main stream or sub
stream), Click “OK” after finishing.
Fig 2.5.14
Notice: channel name, server name and server address can’t be modified.
2.5.1.10 View DVR local log
You can search the server status from client software.
In the device configure interface, right click one device and select “Get device log” in the
- 28 -