User`s manual

User’s manual of remote client software
Fig 2.5.5
Input the IP and port NO of stream media server, click “OK” to finish. (Notice: if you setup
stream media server, the child stream will disabled)
2.5.1.4 Add DVR
Right click the node in the left window, show as fig 2.16.1. select “add device” and the
interface of server properties will popup.
Configure the server properties in this interface, input the server name, server IP, user name
and password, server channel, server network port, server type, server multicast IP, device serial.
The server IP and domain are single option, you can choose one of them to add the server. The
multicast IP is a D-class IP. Between 224.0.0.0 to 239.255.255.255, the multicast IP in the client
software and video server itself must be the same. It can be not setup if the network protocol don’t
select MCAST. (Notice: can’t add more than 50 devices)
Use three ways to connect server.
1. Use the server IP. Show as Fig 2.5.6.
Fig 2.5.6
- 24 -