User`s guide

ManualsBrandsQ-See ManualsComputer equipmentRemote Client Software V 4.0.1

Polycom, Inc. 35

Release Notes

Polycom RealPresence Group Series, Version 4.1.5

User Interface GS-15307 4.1.3 If an admin password value is

entered and then removed, the

admin settings in the local

interface display the lock icon

and prompt for credentials.

Enter a user name, but

leave the password field

empty.

User Interface GS-14652 4.1.3 The Recent Calls list might

show multiple entries for a failed

call to a directory entry.

User Interface GS-11047 4.1.1 In the setup wizard, when

completing the Security Profile

screen by selecting Maximum

and moving to the next screen

for registration, navigating back

to the Security Profile screen

disrupts the interface. You

cannot change the Security

Profile from Maximum to Low

while using the setup wizard.

Do not attempt to navigate

backwards through the

setup wizard to the

Security Profile screen.

User Interface GS-8219 4.0.2 On occasion, it takes

approximately 10 seconds

before the VLAN ID, Video

Priority, Audio Priority, and

Control Priority settings

appear after you enable 802.1

p/Q.

Video GS-17413 4.1.3 If you update the Multipoint

Mode setting when you are not

in a call, the RealPresence

Group system does not save

the change. If you update the

setting during a call, the setting

is applied until the end of the

call.

Update the Multipoint

Mode setting while in a

call.

Video GS-14110 4.1.3 In an SVC call, an incoming

video stream in 720p format

always negotiates to SVC BP

(Base Profile) instead of SVC

HP (High Profile).