User`s guide

ManualsBrandsQ-See ManualsComputer equipmentRemote Client Software V 4.0.1

Polycom, Inc. 32

Release Notes

Polycom RealPresence Group Series, Version 4.1.5

Monitors GS-15809 4.1.3 If the RealPresence Group 550

or 700 system is in a sleep state

and the monitor is set to Auto,

the primary monitor does not

get a signal when the HDMI

cable is switched to a VGA

cable.

Change the monitor's

settings to Manual and

VGA.

Monitors GS-14553 4.1.3 When using the VisualBoard

application, monitor 2 shows

black video if the resolution is

set to 1080i60.

Configure Monitor 2 to use

1080p60.

Monitors GS-14399 4.1.1.1 RealPresence Group 500

systems might not display

properly on Vizio monitors

model M551d-A2

Use a different monitor.

Monitors GS-8188 4.0.1 On the RealPresence Group

700 system, the output display

is always black when Monitor 1

is a VGA monitor with a Sleep

setting of No Signal. If Monitor

2 and Monitor 3 are VGA

monitors and the Sleep setting

is No Signal, the system does

not send a signal to those

monitors when it goes to sleep.

Multipoint GS-9938 4.0.2 On occasion, when a

RealPresence Group 700

system is the MCU in an 8-way

call, the system has a slight

delay in responding when the

user navigates to the local

interface.

Multipoint GS-7724 4.0.2 When a RealPresence Group

system is the MCU in a 4-way

call and another endpoint sends

content, the MCU does not

display Content Call statistics

for the endpoint sending

content.

Multipoint GS-452 4.0.0 RealPresence Group systems

do not support Conference on

Demand.