User`s guide

Polycom, Inc. 3
Release Notes
Polycom RealPresence Group Series, Version 4.1.5
Polycom RealPresence Group 700 System and Accessories
The administrator settings can be configured in the system’s web interface. Users can access calling
functions using the remote control and user-friendly onscreen menus.
For more information about setting up and using the RealPresence Group systems, refer to the documents
on the product pages at support.polycom.com.
Monitor Setup
Depending on the monitor you are using with the RealPresence Group system, you might want to change
some default settings. Before setting up your system, review the following information to determine what
changes might be necessary.
Display All Pixels
Before attaching your Polycom RealPresence Group system to a TV monitor, ensure the monitor is
configured to display all available pixels. This setting, also known as
fit to screen or dot by dot , enables
the entire HD image to be displayed. The specific name of the monitor setting varies by manufacturer.
Ensure Monitor Availability
By default, the RealPresence Group system sends no signal when it goes to sleep. This might result in some
monitors turning off or entering standby mode. If your monitor does not wake up when the RealPresence
Group system wakes up and reestablishes the signal, you have several options:
● Turn the monitor off and on again before using the RealPresence Group system.
● Configure the monitor to not turn off or enter standby mode when it is not receiving a signal.
● Set up the RealPresence Group system to display black video, instead of not sending a signal, when
it goes to sleep.
Version 10 is the latest hardware version of the RealPresence Group Series. There are no
performance benefits or feature differences from earlier versions. All RealPresence Group Series
software versions are supported on all RealPresence Group system hardware versions.