User`s guide

Polycom, Inc. 20
Release Notes
Polycom RealPresence Group Series, Version 4.1.5
● Use the Trace Route test to determine the routing path between the local system and the IP address
entered.
If the test is successful, the RealPresence Group system lists the hops between the system and the
IP address you entered.
New Features in 4.0.1
The version 4.0.1 software includes the features and functionality of version 4.0.0.1, with the following
additions.
EagleEye Acoustic Camera
EagleEye Acoustic is a compact camera designed for smaller meeting and huddle rooms. It features 1080p
with 30 frames per second performance, electronic pan, tilt, and zoom, and built-in microphones. A unique
rubberized hinge allows you to mount the EagleEye Acoustic camera on top of a flat-panel display.
SmartPairing in Automatic Mode
SmartPairing in automatic mode allows you to detect and pair a RealPresence Group system from the
RealPresence Mobile application on an Apple iPad tablet. After you pair the application and the
RealPresence Group system, you can use the RealPresence Mobile application to perform two basic
functions:
● Use the application as a remote control for the RealPresence Group system.
● Swipe to transfer a call from the RealPresence Mobile application to the RealPresence Group
system.
Use Telnet on a computer connected to the LAN to enable SmartPairing on the RealPresence Group
system. Send the API commands to the Polycom RealPresence Group system through Telnet port 24.
To enable SmartPairing:
1 On the computer, start a Telnet session using the Polycom RealPresence Group system IP address
and port number — for example, telnet 10.11.12.13 24.
2 Type the following to determine the current status of SmartPairing:
systemsetting get uspairingenabled
3 If SmartPairing is disabled or is in Manual mode, type the following to enable SmartPairing in
automatic mode:
systemsetting uspairingenabled Auto
Automatic SmartPairing is enabled.
These are the available parameters for use with the
uspairingenabled command.