User`s guide

Polycom, Inc. 18
Release Notes
Polycom RealPresence Group Series, Version 4.1.5
To change the SVC call setting:
1 In the web interface, navigate to Admin Settings > Network > Dialing Preference.
2 Under Dialing Options, select one of the following settings from the Scalable Video Coding
Preference (H.264) list.
3 Click Save.
For more information about the features and limitations of SVC-based conferencing, refer to the Polycom
RealPresence SVC-Based Conferencing Solutions Deployment Guide available at support.polycom.com.
Support for RealPresence Group 700 Systems
The Polycom RealPresence Group 700 system delivers high-performance video collaboration for meetings
that require best-in-class quality and flexibility. The system works well in standard conference rooms, as well
as boardrooms and large lecture halls. The RealPresence Group 700 system allows you to design unique,
customized experiences for nearly any application or environment, including those with multiple displays,
cameras, and content sources.
The RealPresence Group 700 system can provide power to the EagleEye III camera through an HDCI
connector. This configuration allows a sleeping EagleEye III camera to wake up by receiving a signal from
the camera's IR sensor. The camera does not require any additional power supply or IR extender.
The RealPresence Group 700 system supports a low-power standard that limits the power supplied to the
camera when the system is powered off. When the EagleEye III camera is only receiving power from the
system, it does not have an active IR receiver capable of turning the RealPresence Group system on using
the handheld remote.
If the camera IR is the only exposed IR and you normally turn the system on and off with the handheld
remote control, use one of these alternate solutions:
● Provide direct power to the Eagle Eye III camera with the optional EagleEye camera power supply,
1465-52748-040. This allows the IR sensor to remain powered on, so that the camera is capable of
receiving IR commands from the remote control.
● Position the RealPresence Group system so that the IR receiver on the front of the system has a
line-of-sight to the remote control.
● Use a third-party IR extender to extend the IR signal from the room to the IR receiver on the front of
the RealPresence Group system.
For more information on the Group 700 system, refer to the Administrator’s Guide for the Polycom
RealPresence Group Series.
Support for Monitor Profiles
Configure Monitor Profiles to set the preferences for what is shown on available monitors. Doing this allows
you to customize the monitor configuration to match your environment or your desired meeting experience.
SVC Setting Description
SVC then AVC This is the default setting.
AVC Only This option disables SVC.