Installation guide

74 Identity Manager 4.0.1 Framework Installation Guide

Carefully copy the contents, and make sure that no extra lines or spaces are included. You

should begin copying from the first dash (-) of the credential (----BEGIN PRODUCT

ACTIVATION CREDENTIAL) through the last dash (-) of the credential (END PRODUCT

ACTIVATION CREDENTIAL-----).

WARNING: If Standard Edition activation is applied to an existing non-activated

Advanced Edition system, it stops the Identity Manager Metadirectory server and drivers.

3 Open iManager.

4 Select Identity Manager > Identity Manager Overview.

5 Click to browse for and select a driver set in the tree structure.

6 On the Identity Manager Overview page, click the driver set that contains the driver to activate.

7 On the Driver Set Overview page, click Activation > Installation.

8 Select the driver set where you want to activate an Identity Manager component, then click Next.

9 Do one of the following:

 Specify where you saved the Identity Manager Activation Credential, then click Next.

 Paste the contents of the Identity Manager Activation Credential into the text area, then

click Next.

10 Click Finish.

NOTE: You need to activate each driver set that has a driver you want to use. You can activate any

tree with the credential.

8.3 Viewing Product Activations for Identity Manager and for

Drivers

For each of your driver sets, you can view the Product Activation Credentials you have installed for

the Metadirectory server and Identity Manager drivers:

1 Open iManager.

2 Click Identity Manager > Identity Manager Overview.

3 Click to browse for and select a driver set in the tree structure, then click to perform the

search.

4 On the Identity Manager Overview page, click the driver set you want to view the activation

information for.

5 On the Driver Set Overview page, click Activation > Information.

You can view the text of the activation credential or, if an error is reported, you can remove an

activation credential.

NOTE: After installing a valid Product Activation Credential for a driver set, you might still see

“Activation Required” next to the driver name. If this is the case, restart the driver and the message

should then disappear.