Installation Guide

7
Option B: VGA Monitor
B1. Plug a VGA cable (not included) into the NVR’s VGA
port. VGA might not support full high denition output.
B2. Connect the other end of the VGA cable to the
monitor. A 19” monitor or larger with 1280 x 1024
resolution is highly recommended.
B3. Plug the monitor into a surge protector.
Step 4: Connect Mouse
Plug the included mouse into the USB port on the back
of the NVR. If your model has two USB ports on the
back, either one will work.
19” Monitor
or Larger