Installation Guide

C. Plug the other end of the camera cable into an

available PoE port on the back of your NVR. Again,

you will hear a clicking noise when cables are inserted

correctly. Repeat steps A through C for each camera.

Step 3: Connect NVR to Display

There are two options to connect the NVR to a display.

Option A: HDMI

A1. Plug the included HDMI cable into the NVR’s HDMI port.

A2. Connect the other end of the HDMI cable to the

monitor or TV.

A3. Plug the monitor or TV into a surge protector.

NOTE: Channels are assigned to cameras in the order they

are connected. Port numbers do not indicate the channel that

will be assigned to the camera.