MODEL QT17DVR4C Digital Peripheral Solutions Inc 8015 Ecrystal Drive Anaheim, CA 92807 1-714-998-3440 PDF created with pdfFactory trial version www.pdffactory.com Q-SEE Tech Support IN USA MONITOR:9am-5pm PST TEL:1-899-998-3440 Email:ts@dpsi-usa.com Website:www.q-see.
LCD WITH BUILT-IN DVR USER MANUAL Alarm Telecom Network interface Others LCD WITH BUILT-IN DVR USER MANUAL Catalogue Motion Detection 192 detecting areas can be set, and 16 levels sensitivity adjustable Alarm input Four channels alarm（On/off value） input independently Alarm input solutions Open/ close circuit optional Important Safeguards… … … … … … … … … … … … … … … … … … … … e3 Chapter 1 Survey of Products… … …… … … … … … …… … … … … … … e4 Alarm Output One channel linkage alarm output，one c
LCD WITH BUILT-IN DVR USER MANUAL LCD WITH BUILT-IN DVR USER MANUAL Main specific ations for the system Camera Specification 17 '' 4:3 TFT/LCD Tube Camera Features 1/3" Color CCD Video Resolution 420 TV Lines Weatherproof Video Input Four Channels Independent Input 1.0Vp-p, 75 Ω BNC Video Output Two Channels PAL/NTSC output，1.
LCD WITH BUILT-IN DVR USER MANUAL LCD WITH BUILT-IN DVR USER MANUAL HDD Status HDD Status Capacity Free_Space 1 Video Record 160G 128,125MB 2 Sleep 040G 039,000MB 3 None 000G 000,000MB 4 None 000G 000,000MB Return will enter into inquiry machine information interface, this interface will display current software version and MAC address information. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION:TO REDUCE THE RISK OF ELECTRIC SHOCK,DO NOT REMOVE THE BACK.
LCD WITH BUILT-IN DVR USER MANUAL LCD WITH BUILT-IN DVR USER MANUAL IMPORTANT SAFEGUARDS 4.3 Video Record Status. Caution This equipment is to be opened by ONLY a qualified serviceperson. There are no user serviceable parts inside. Opening this equipment may expose to dangerous voltage and other risks. Incorrect re-assembly of this equipment may result in electric shock. Search Menu All Record Log Record Status 1.
LCD WITH BUILT-IN DVR USER MANUAL LCD WITH BUILT-IN DVR USER MANUAL 4.2 Log Chapter 1 Survey of Products Moving cursor to [LOG] item, and pressing [ENTER] key will enter into inquiry log interface 1. 1 Products Survey Input date and type of the log Type: All Event Date : 2006--04--28--23--30 Start Return The equipment is a kind of small channels digital monitoring products which is specially designed for security industry.
LCD WITH BUILT-IN DVR USER MANUAL LCD WITH BUILT-IN DVR USER MANUAL l Manual Recording, time recording, alarm recording, motion detection recording saves the hard disc space ensuring effective usage of the hard drive space for longer periods of time. l Motion detection recording function, can setup more than 192 detecting areas independently. l The system supports pre-alarm recording and alarm prolong recording guarantees, which guarantees the integrity of alarm recording equipment.
LCD WITH BUILT-IN DVR USER MANUAL LCD WITH BUILT-IN DVR USER MANUAL CBR: Denotes fixed code flow's coding format, this coding format shows, image quality is invariable, but image quality can change according to moving object's scale inside, the larger the Chapter 2 System Installation moving object occupied in image's scale, the worse the image quality Message Sound Switch: When setting is turn on, hard disk error and password input error, machine buzzer will sound.
LCD WITH BUILT-IN DVR USER MANUAL LCD WITH BUILT-IN DVR USER MANUAL Chapter 3 System Operating Manual 3.3.6 Net Parameter Move the cursor to the net parameter and press enter to get into the system's net interface setting. 3. 1 Instructions for front panel and remote control unit See picture below: 3.1.1 Front Panel a). IP address: Press enter or manually type numbers on the IP address line. POWER H.D. ALA RM b).
LCD WITH BUILT-IN DVR USER MANUAL 3.3.5 Housing setting LCD WITH BUILT-IN DVR USER MANUAL 3. 1.2 Re mote Control Unit Moving cursor upon [Pan/Tilt setting] and pressing [ENTER] key can enter into quad channel L O GIN/ L OCK Pan/Tilt port setting interface PO WE R ON PL AYBA C K A. Channel: Denotes system's channel number. B. Protocol: Denotes the communication protocol between system and decoder.
LCD WITH BUILT-IN DVR USER MANUAL LCD WITH BUILT-IN DVR USER MANUAL ⑤ Other function buttons 【POWER/ON】Button：for turning on and off the machine（Standby and start）； 【LOG IN/LOCK】Button：get the operating rights, to type in the password and lock operation； 【PLAYBACK】Button：For reviewing the recording, log, state of hard disc,information of software edition and so on; 【QUAD】Button：For switching pictures between built-in quad, dual views and single picture； Order of Display : Channel1 Channel 2 Channel 3 Chan
LCD WITH BUILT-IN DVR USER MANUAL LCD WITH BUILT-IN DVR USER MANUAL 3. 2 System on/off 3.3.2 CHANNEL SETU P 3. 2.1 Sy stem Start Channel setup setting includes channel name, screen display, clock insert, TV screen cover, etc Channel Setup CH Title CH Name Time InSert Mask CH View 1 Open Down Close Open 2 Open Down Close Open 3 Open Down Close Open 4 Open Down Close Open Return a). Channel: Enter the channel number.
LCD WITH BUILT-IN DVR USER MANUAL LCD WITH BUILT-IN DVR USER MANUAL 3.2.3 System On and Off More the Arrow key to each sub-menu and press enter for setting . When the system is under monitoring state, please press twice of the 【on/off】button in the remote control unit if you want to turn off the system， The system will change into standby state from running state when it is off；If you want to restart the system, please press the 【on/off】button on the remote control.
