User manual

24 25
LOCAL SCHEDULE CONFIGURATION
In this tab you can set your computer to record on a schedule that is separate from that set
on the DVR itself.
Each day of the week - and each channel - can be independently scheduled to record.
Holidays can be given their own special schedule which will override the regular configuration.
The time “ruler” has marks for each hour in the day, which in turn are broken up into
15-minute sections.
Setting a Schedule
Blocks of recording times are set or changed using the pencil and eraser tools at the upper
right of the schedule window. Clicking and dragging the tool will add or erase blocks of time
respectively.
Pencil Creates a block of time
Eraser Deletes an existing block of recording time
STEP 1. Select a camera from those available on the left.
STEP 2. Select the pencil tool and click on the time you want to start recording on the day
you wish to schedule. Click and drag to set the recording period. A yellow-green box will
appear to the left to indicate the start and end times you are selecting. Scheduled areas will
appear in blue and you can add onto an existing block of time.
If you make a mistake and need to
change the hours selected, use the eraser
tool to delete the desired block of time.
STEP 3. Once you have completed a weekly schedule for a camera, you can choose to
copy that schedule to other cameras - even those on a different system - using the “Apply
Settings to” option at the bottom of the window.
Use the pull-downs to select which device(s) to apply the schedule to and/or which other
channels will use the same schedule. Pressing the Copy button will copy the schedule to the
selected devices and channels.