User's Manual

QSTD2400 Series DVR User’s Manual
7
The Rear Panel Layout for 4 Channel DVR is shown as Fig 2.4 Rear 4Ch.
Fig 2.6 Rear Panel for 4-channel DVR
Name Description
1 Video in Video input channels from 1-16
2 Video out Connect to monitor
3 S-video S-Video output, connect to monitor
4 Audio out Audio output, connect to the Speaker
5 Audio in Audio input
6 PS/2 Port Connection for PS/2 mouse
8 USB MOUSE Connection for USB mouse
9 RJ45 Port Connect to router for network/internet access
10 VGA Port VGA output, connect to monitor
11 COM Port For debugging or serial input
12 ALARM IN/OUT
External sensor input 1-4 Relay output 1-4. Connect to
external alarm. Please refer to 2.3.2 Installing Sensor
Alarm
13 Power Power on/off
14 Loop out For outputting each channel’s image independently
15 e-SATA Port Connect to eSATA HDD for backup
Tab 2.4 4 Channel Rear Panel Layout
Notice: The resolution of VGA output is 800*600/60Hz. If connected through VGA port,
please assure your display supports the display mode. (For most of LCD screens, they can
adapt to it automatically without manual adjustment)