- Digital Peripheral Solutions Security Camera User Manual

QSTC201/211 IP-CAMERA USER MANUAL
39
Please refer to the following table for parameters and instructions of IP
configuration.
Static IP
Change IP address through IP TOOL:
 Click the device, then double-click or click “Net set” button to enter into
modify interface refer to Figure 5-16
 Delete the initial data and input IP address which should exist in the same
LAN with PC
 Click “OK” button to save the setting.
Note: dynamic IP can’t change the IP address
Fig 5-16 Change IP address
Note: If IP Tool search can’t find the device, please refer to chapter 3 IE
Remote Access.
5.5.3 Wireless configuration
1. Enter into "Network configuration"--"Wireless configuration" refer to Figure