Technical Manual

QSDR16RTCB User Manual

Audio Settings: In your Multimedia player interface, go to the Setting menu on your toolbar. From there, go to

SettingAudio Channel SettingNormal Video Bar (Picture 31). This will open up a dialog as illustrated in Picture

32 allowing you to choose from a drop down list of which audio channels to play. Make your choice from the options

provided in the drop down list and click

next to “The channel has sound data”. Click Apply then OK. Please

note that these setting changes will not take effect until you re-start your multimedia player.

5.2.7: Device Management

Device management allows you to configure the controls for the Hard

Disk Drive, External Alarm, PTZ Cameras, Mobile Phone Monitoring,

and Motion Detection. The Device Management interface (Picture 33)

can be accessed through the Main Menu interface illustrated in Picture 4

by clicking on the [Device] button. You can then click on the button of

the device you wish to configure as illustrated in Picture 33 and

customize them according to your desired specifications.

5.2.7.1: HDD Management

Once you install a new HDD in your system, you will want to click on the

HDD icon in the Device Management interface (Picture 33) to configure

its settings. Doing this will generate a pop up HDD management

interface as illustrated in Picture 34. When you install a HDD, the

system will automatically detect if it needs to be formatted. Should the

disc need to be formatted, the status column in the HDD Management

interface will indicate “Not format”. If the status appears as “Normal”,

then your HDD does not need to be formatted.

(Picture 29)

(Picture 30)

(Picture 31)

(Picture 32)

(Picture 33)

(Picture 34)