Remote Monitoring Guide

17
6. Clicking on the Asee icon in PICTURE 7 will display the screen in PICTURE 8, where
you can click on the Open button on the bottom of the screen to display the screen in
PICTURE 10 to view the cameras
7. To return to this screen you would go to the program list on the phone and click on the
Asee icon shown in PICTURE 9.
The functions of the buttons in PICTURE 10 are shown below:
1 PTZ Direction 2 Zoom+ -
3 Aperture 4 Focus+ -
5 Channel Select 6 Play & Pause
7 Full/Normal Screen 8 Snapshot (save to phone)
9 Setup 10 Change Channel Group
11 Help
8. Click on the Setup button (number 9) to bring up the screen shown in PICTURE 11 to
enter the network information needed to access your DVR from the phone.
9. Setting Menu: Enter the device info.
Address: Enter the IP address of the DVR
Port: Enter the Mobile Port No. of the DVR
Device Name: Enter DVR name (Customize)
User ID: Enter the User’s Name
Password: Enter the User’s Password
You can push the History button in the upper right corner to view the IP addresses you
have been to.
BLACKBERRY
SUPPORTED BLACKBERRY MODELS
CURVE 8900, BOLD 9000 & 9700, PEARL 9100 & 9105, TOUR 9630, TOUR 2 9650, ONYX 9020
1. Blackberry Desktop Manager needs to be installed on your PC. If you do not have
this you can download it from the Blackberry website. Then download the Blackberry
application file from the DVR product page on the Q-See website and extract it. You
will get a Asee.alx file.
2. Connect your phone to your PC via USB cable
3. Open the Desktop Manager
4. Choose APPLICATION LOADER from the Main Menu shown as PICTURE 1
5. Click START Button on the “Add/Remove” application menu shown as PICTURE 2
RemoteMonitorGuide.indd 17 10/20/2010 4:43:40 PM