Remote Monitoring Guide

NETWORK SETUP

The Network Setup menu options need to be conﬁgured in order to access the DVR remotely

over a network or the internet. From the Network Setup menu, select the Network Type

(DHCP, PPPoE, or Static), Port and Web Port (80 and 9000 by default).

To conﬁgure the Network settings of the DVR, from the Main Menu, select the Network icon

and the Network Setup menu opens (IMAGE 12).

Type can be set to DHCP, PPPoE or Static. To have the router assign the IP address, use

DHCP. To select the address, use static. To attach directly to a modem instead of using a

router, use PPPoE. For more information, please see the remote access guide.

DHCP

When selecting DHCP as the Network type, the router automatically generates a DVR IP

address once the Network Setup menu is exited. Write down this IP address. Then switch the

Network Type to “Static” and re-enter the IP address to avoid any discrepancies that might

occur in the event the router auto generates a different IP address in the future.

IMAGE 12 IMAGE 13

PPPOE

When selecting PPPoE as the Network type, input the username and password provided by

your internet service provider. You would use this option if you are attaching the DVR directly

to DSL or cable modem instead of a router.

RemoteMonitorGuide.indd 4 10/20/2010 4:43:37 PM