QSDF8204 Digital Video Recorder User Manual QSDF8204 DVR User Manual For H.
QSDF8204 Digital Video Recorder User Manual CONTENTS CHAPTER 1 Introduction ................................................................................. 4 1.1 DVR Introduction.......................................................................................... 4 1.2 Main Features and Functions....................................................................... 4 CHAPTER 2 Panel Functions .......................................................................... 6 2.1 Check Accessories.........
QSDF8204 Digital Video Recorder User Manual CHAPTER 5 Operation with Mouse ............................................................... 48 5.1 Switch Channel .......................................................................................... 48 5.2 Enter Menu List .......................................................................................... 48 5.2.1 Search ..................................................................................................................... 48 5.2.
QSDF8204 Digital Video Recorder User Manual CHAPTER 1 Introduction 1.1 DVR Introduction This DVR uses Dual Stream technology, and standard H.264 algorithm, combined with a fashionable outline design and the latest advanced video compression format, with a main processor that can process recorded video and internet transmission simultaneously at different bit rates and has a distinct independent LCD monitor embedded on the front panel.
QSDF8204 Digital Video Recorder User Manual PTZ CONTROL • Supports various PTZ protocols • Supports 16 PTZ presets • Supports remote PTZ control COMMUNICATION PORT FOR PTZ CAMERAS • RS 485 communication port NETWORK • Supports TCP/IP protocol • Supports remote DVR configuration • Supports static IP, dynamic IP (DHCP) and PPPoE • Supports DDNS: Pending • Real-time live surveillance, remote playback and remote backup • Remote PTZ control and Preset setting • Supports IE browser • Supports Central Management
QSDF8204 Digital Video Recorder User Manual CHAPTER 2 Panel Functions Warning: Please power off the DVR before you connect other devices to it. 2.1 Check Accessories When you receive the unit, please check the accessories and make sure you have all of the parts. Normally, accessories will include one mouse, a power cable, manual, and some screws for installing HDD.
QSDF8204 Digital Video Recorder User Manual Fig2.1 Front Panel Item Name Function 1 Digital buttons Input numbers or choose cameras 2 +/Menu button 1. Increase the value in setup 2. Enter menu in live mode 3 -/Backup 1. Decrease the value in setup 2. Enter backup mode in live mode 4 RECORD Record manually 5 REW Rewind 6 PLAY Enter playback interface 7 10+ Choose channel 10 and above 0-9, and double-click is 10. 8 SEARCH Enter search mode 9 FF/PTZ 1. Fast forward 2.
QSDF8204 Digital Video Recorder User Manual 2.3 Rear Panel Layout subject to change, may be slightly different from your model. The rear panel sketch and interface buttons are shown below: Items Functions 1 ALARM IN Connect to external sensor 1-4. 2 ALARM OUT Relay output. Connect to external alarm.
QSDF8204 Digital Video Recorder User Manual 2.4 Remote Control Introduction 2.4.1 Using Remote Control Notice: Please note that Remote Control is not a standard part of this DVR. Your package might not include it. To setup Remote Control: 1. Open the battery cover of Remote Control. 2. Put in two AAA batteries with poles aligned correctly. 3. Replace the battery cover.
QSDF8204 Digital Video Recorder User Manual The functions of the buttons on the Remote Control are described in the table below: Items 1 Power Button 2 INFO Button 3 12 13 REC Button Number and Letter Buttons Multi-Screen Button SEARCH Button MENU Button ENTER Button Direction Button +/- Button Playback Control Button AUDIO Button Auto Dwell Button 14 A 15 PTZ Control Button 4 5 6 7 8 9 10 11 10 Names Button Functions Start shutdown to stop firmware running. Do it before powering off.
QSDF8204 Digital Video Recorder User Manual CHAPTER 3 Basic Operation Guide 3.1 How to Start DVR Notice: Before powering on the unit, please make sure the power input matches the local power voltage. To start the DVR: STEP1 Connect the DVR to AC adaptor and plug in. STEP2 Turn on the DVR. STEP3 Wait for the DVR to initialize. After DVR is powered on, ‘STARTING……’ appears on the screen, which indicates the DVR is initializing. After ‘WELCOME’ is displayed, you enter into live display mode.
QSDF8204 Digital Video Recorder User Manual 3.2 Main Menu Setting There is an administrator setup in the DVR. The administrator has control over all settings. The username is "Admin", and default password is "123456". Steps of entering the Main Menu are: Notice: The instructions in the examples are the steps using the Remote Control. If using a mouse the operation may be easier, you would follow the instructions in dialogue boxes and navigate through menu items.
QSDF8204 Digital Video Recorder User Manual 3.2.1 Basic Configuration Basic Configuration menu is shown as Fig. 3.4. Fig 3.4 Basic Configuration Fig 3.5 Time adjustment 1. VIDEO FORMAT There are two video formats: NTSC and PAL. Please select according to your area, NTSC is used in the USA. 2. TIME POSITION This item is for setting up the position of the time on the display. There are three options: • • • TOP: Time is displayed on top of the screen.
QSDF8204 Digital Video Recorder User Manual 5. DVR ID DVR ID consists of three numbers. STEP1 Move the cursor to the item. STEP2 Press "Enter" key to modify numbers. STEP3 Enter three numbers, and then press "Enter" key to confirm the modified entry. STEP4 Press "OK" button to confirm the operation. 6. DATE FORMAT There are three date formats: • • • Asian Date format: YY/MM/DD European Date format: DD/MM/YY American Date format: MM/DD/YY 7. TIME ADJUSTMENT Time Adjustment menu is shown as Fig. 3.5.
QSDF8204 Digital Video Recorder User Manual STEP2 Enter channel name. STEP3 Press "Enter" key to confirm the operation. 3. SHOW NAME If selecting "SHOW NAME", the camera name will be displayed in live view. If unselecting "SHOW NAME", the camera name will not be displayed. 4. CHANNEL HIDE If selecting "HIDE", the video from the channel will not display in live view, but it will still be recorded. If unselecting "HIDE", the video will be displayed. 5.
QSDF8204 Digital Video Recorder User Manual 3. PRERECORD TIME Prerecord time refers to the amount of time recorded from memory before the alarm was triggered. There are two options: 5 seconds and 10 seconds. 4. TIME STAMP If selected, record time will be displayed on the bottom of the screen at playback 5. CHANNEL STEP1 Move the cursor to the item. STEP2 Press "Enter" key to switch the channel and select. 6. VIDEO QUALITY There are five options: lowest, lower, medium, higher and highest.
QSDF8204 Digital Video Recorder User Manual STEP7 Press "Enter" key to confirm the setup. On weekday and holiday, you can select whole day or set four periods in a day to record. 9. FRAME RATE SETUP Frame rate is the number of pictures recorded each second. If choosing 15, the picture-recording rate is 15 frames per second. User can set frame rates based on the record mode. If the video format is NTSC, there will be five frame rates to choose: 1, 3, 7, 15 and 30. The maximum frame rate is 30.
QSDF8204 Digital Video Recorder User Manual 1. HOLD TIME This sets the continued recording time after an alarm is triggered. There are two options: 1 minute and 2 minutes. It also determines the interval between motion detection events. If the HOLD TIME is 1 minute, if new motion is detected within this period it will be considered part of the previous event instead of the start of a new event. 2. CHANNEL STEP1 Move the cursor to the channel. STEP2 Press "Enter" key to switch the channel and select. 3.
QSDF8204 Digital Video Recorder User Manual Fig 3.11 Detection Area Setup Sub-steps for manually selecting the detection area are described below: 1. In the Area Setup submenu, choose "CUSTOM" option. 2. Press "Enter" key to confirm the operation. 3. Press "Up", "Down", "L eft" and "R ight" buttons to choose the area which needs to be detected 4. Press "Enter" key to select or cancel the area. 5. Press "Esc" button to confirm the option and exit "CUSTOM" option.
QSDF8204 Digital Video Recorder User Manual 1. HOLD TIME This sets the continued recording time after an alarm is triggered. There are two options: 1 minute and 2 minutes. It also determines the interval between motion detection events. If the HOLD TIME is 1 minute, if new motion is detected within this period it will be considered part of the previous event instead of the start of a new event. 2. SENSOR STEP1 Move the cursor to the "SENSOR" option. STEP2 Press "Enter" key to switch the Sensor. 3.
QSDF8204 Digital Video Recorder User Manual OTHER ALARM Other Alarm submenu is shown in Fig. 3.13. Other alarm includes video loss, disk full and so on. Fig 3.13 Other Alarm Configuration There are two options of alarm output: ALARMOUT1 and BUZZER. Their functions are same with that in sensor alarm. 3.2.5 PTZ Configuration PTZ Configuration menu is shown in Fig. 3.14. Fig 3.14 PTZ Configuration 1. CHANNEL Set the channel connecting to the Speed Dome. 2.
QSDF8204 Digital Video Recorder User Manual STEP2 In Preset submenu, press "Enter" button to switch the preset point needing to be reset. STEP3 Press "ADJUST" button to enter PTZ mode. STEP4 On the front panel, press "ZOOM", "FOCUS", "SPEED", "IRIS", "+" (MENU) and "-" (PTZ) buttons to modify the position of the preset point. STEP5 Press "UP", "DOWN", "RIGHT" and "LEFT" buttons to rotate the Speed Dome. STEP6 Press "ESC" button to come back to Preset menu.
QSDF8204 Digital Video Recorder User Manual Fig 3.17 Authority Setup 1. AUTHORIZATION CHECK If you put a checkmark in "AUTHORIZATION CHECK", all users need to input the password before entering the Main Menu. If you do not check "AUTHORIZATION CHECK", users can enter the system directly without password. 2. USER Press "Enter" key to switch to another user. Use "+” and "-" buttons change users. 3. PASSWORD The default password of administrator is ‘123456’.
QSDF8204 Digital Video Recorder User Manual 6. DELETE USER STEP1 Move the cursor to the "DEL" button on the screen. STEP2 Press "Enter" key to confirm the operation. When a user is deleted, the username and password will no longer exist in the system. 3.2.7 Network Configuration Network Configuration menu is shown as Fig. 3.18. Fig 3.18 Network Configuration Fig 3.19 Basic Configuration BASIC CONFIGURATION Basic Configuration submenu is shown as Fig. 3.19. STEP1 Move the cursor to “Basic configuration”.
QSDF8204 Digital Video Recorder User Manual Fig 3.21 System Information This is the DVR’s IP configuration. There are three options: STATIC, DHCP and PPPoE. If you use the Static IP address option you will need to access the router the DVR is attached and get the setup information. You can do this by going to the run option on a computer that is attached to the same router as the DVR and typing cmd or command to get to a command prompt.
QSDF8204 Digital Video Recorder User Manual DDNS CONFIGURATION DDNS Configuration submenu is shown as Fig. 3.22. The DVR does not currently support any DDNS servers in the USA, support may be added in future firmware updates. Fig 3.22 DDNS Configuration 3.2.8 Manager Tools The Manager Tools menu is shown as Fig. 3.27. Fig 3.27 Manager Tools SHUTDOWN SYSTEM This option is used to shut down the system. STEP1 Enter the SHUTDOWN submenu.
QSDF8204 Digital Video Recorder User Manual There are two options: FORMAT and CANCEL. 1. QUICK FORMAT If you check this item, you can format the hard drive quickly. 2. FORMAT STEP1 Select "FORMAT" button. STEP2 Press "Enter" key, a warning will pop up: ‘Format will erase all data on this hdd! Format now? ’ STEP3 Press "OK" button to format the HDD; Press "CANCEL" or "ESC" button to cancel this operation.
QSDF8204 Digital Video Recorder User Manual SYSTEM INFORMATION System information submenu is shown as Fig. 3.30. It displays the information about the system, such as firmware version, device name, DVR IP ADDRESS, Client information and so on. Fig 3.30 System Information Press the "INFO" button on the front panel and it will display the system information on the screen. UPDATE FIRMWARE Fig 3.31 Update Firmware Update Firmware submenu is shown as Fig. 3.31.
QSDF8204 Digital Video Recorder User Manual IMPORT CONFIGURATION & EXPORT CONFIGURATION This function is used to help users manage multiple DVRs conveniently. When users need to set up the same parameters in more than one DVR, they can copy one DVR’s setting to all others without setting them up one by one.
QSDF8204 Digital Video Recorder User Manual ZOOM STEP4 STEP5 In PTZ mode, press "ZOOM" button. Press "+" and "-" buttons to zoom in and zoom out. FOCUS STEP1 STEP2 In PTZ mode, press "FOCUS" button. Press "+" and "-" buttons to control focus. IRIS STEP1 STEP2 Dome. In PTZ mode, press "IRIS" button. Press "+" and "-" buttons to change the brightness of the Speed 3.3.2 Search Press the "Search" button, there are five submenus displayed on the screen: PLAYBACK, BACKUP, DELETE and LOCK.
QSDF8204 Digital Video Recorder User Manual 2. Search by Time All records can be searched through this option. Steps of searching by time are below: STEP1 In Calendar submenu, select date. STEP2 Press "Enter" key to enter the Playback submenu, refer to Fig. 3.38. STEP3 Press "Enter" key to select channels. STEP4 Select time of the day The times in red have record files. The first line is hour, and the second line is minute. STEP5 Select "PLAY" button. STEP6 Press "Enter" key to play the record.
QSDF8204 Digital Video Recorder User Manual STEP6 STEP7 STEP8 Choose an event record. Press "Enter" key to play back the record Press "Stop" button to get back to live display mode. Notice: If event list is over one page, use "PREV" and "NEXT" buttons to view next page. BACKUP & VIEW BACKUP 1. BACKUP Select the Backup submenu in the Data menu to enter the Backup submenu shown as Fig. 3.39. Fig 3.39 Backup (1) BACKUP MEDIA Backup media refers to the device you are copying the record to.
QSDF8204 Digital Video Recorder User Manual (7) BACKUP Before to backup, users should select BACKUP MEDIA, BACKUP FILE, CHANNEL, START TIME, END TIME and EVENTS. STEP1 Press "BACKUP" button, the backup information of DVR will display on the screen (refer to Fig. 3.40). Fig 3.40 Backup Information STEP2 Press "START" button, and backup will start. The progress of backup will be displayed on the screen. If stopping recording at backup, its speed will be faster.
QSDF8204 Digital Video Recorder User Manual LOCK/UNLOCK Lock submenu is shown as Fig. 3.43. Its function is to lock or unlock the record. Fig 3.43 LOCK/UNLOCK Use "Enter" key to change the state. If a record event is locked, it cannot be deleted or covered. 3.3.3 Information Press "INFO" button, and the information will appear on the screen, such as HDD quantity, usable rate of HDD, record mode including manual/alarm/motion, etc. 3.3.
QSDF8204 Digital Video Recorder User Manual CHAPTER 4 Remote Surveillance 4.1 Accessing DVR The system supports remote surveillance through a network or Internet. This DVR supports five users logging in at the same time. First, the DVR needs to be connected with a router so that it can be accessed over the network or Internet. As for network access, it supports Win2000/XP/Vista. Second, you need to set up the network configuration in the DVR to work with the router.
QSDF8204 Digital Video Recorder User Manual 4.1.2 Accessing DVR Over the Internet When accessing the DVR over the Internet, in addition to the above steps, you would then need to forward port 80 on the router the DVR is attached to, to the IP address of the DVR. You can get instructions on how to do this for most popular routers by going to the www.portforward.com website. On this website click on the orange “Routers” link in the second paragraph (RED box in Fig 4.1.
QSDF8204 Digital Video Recorder User Manual Fig 4.1.3 4.2 Main Interface The function buttons of the remote surveillance display are shown in Fig.4.4. Login Software Setup Remote Playback Remote DVR Configuration Remote PTZ Large Picture Quad Picture Next Video Channel Camera Audio Snap Picture DVR Record Fig 4.4 Main Interface 4.2.1 Login The operation of the network client is the same as the DVR. Default username is ‘Admin’ and password ‘123456’.
QSDF8204 Digital Video Recorder User Manual 4.2.4 Record STEP1 Click "DVR Record" button. STEP2 Select "Start Record" in drop down list to record. STEP3 Select "Stop Record" in drop down list to stop recording. 4.2.5 Camera Audio (for cameras that have microphones) There are two options: close camera audio and open camera audio. The setting steps are: STEP1 When you are in live display mode or playback mode, select a channel to display in Large Picture mode.
QSDF8204 Digital Video Recorder User Manual Meanings of the function buttons in Remote Playback window are shown below: 1. : Play /Pause. 2. : Stop. : Next frame. This button will be valid when playback is paused. 3. 4. You can adjust the speed for playing record in the area shown as Fig 4.6 Speed. Fig 4.6 Playing Speed Bar Fig 4.7 Data Preview Fig 4.7 Data Preview shows with channels have recorded at data at different times. In the figure, left side shows the available channels.
QSDF8204 Digital Video Recorder User Manual 4.3.2 Other Functions BACKUP Click button to enter the Backup window shown as Fig 4.8 Backup. Fig 4.8 Backup There are two methods of backup: by time and by event. 1. TIME BACKUP STEP1 Select time and record type. STEP2 Select camera. STEP3 Press "Browse…" button to select the folder with saved backup files. STEP4 Select cameras that you want to backup. STEP5 Select the type of backup file. STEP6 Click "Backup Now" button, backup will begin. 2.
QSDF8204 Digital Video Recorder User Manual STEP7 1. Choose event and press ">>" button to go to backup list, Click ">>>>" to choose all events. 2. Choose event list and press"<<" button to clear selected event; click "<<<<" button to clear all events. Click "OK" button to run the backup. LOCK /UNLOCK You can use this option to select to lock or unlock files. STEP1 Click Remote Lock. button to enter Remote Lock window as Fig 4.10 Fig 4.10 Remote Lock Fig 4.
QSDF8204 Digital Video Recorder User Manual 4.4 Remote DVR Configuration Click button in Main Interface to enter the DVR Configuration interface shown as Fig 4.12 Remote DVR Configuration. Fig 4.12 Remote DVR Configuration Definitions of buttons in Fig 4.12 are below: System Configuration Live configuration Record Configuration Alarm Configuration PTZ Configuration User Configuration Management Tools Return Through the Remote Configuration interface, users can set all configurations remotely.
QSDF8204 Digital Video Recorder User Manual Fig 4.13 Basic Configuration 1. Video Format Select video format in the drop down list. There are two video formats: PAL and NTSC. 2. Time Position Select time position on the DVR display in the drop down list. 3. DVR Name Change the name of the DVR. 4. DVR No. Give a number to DVR, this can be useful if you have more then one DVR. 5. Date Format Select the option in the drop down list to change the date format.
QSDF8204 Digital Video Recorder User Manual Fig 4.15 Color Settings LIVE CONFIGURATION 1. Channel Select the option in the drop down list to change the channel of the camera. 2. Channel Hide Select the check box to hide the picture in the live display mode. 3. Show Name Select the check box to hide the name of DVR channel in the live display mode. 4. Channel Name Change the name of the channel. COLOR SETTINGS 1. Channel Select the option in the drop down list to change the channel of DVR. 2.
QSDF8204 Digital Video Recorder User Manual 1. Parameter Setting This setting is the same as ‘3.2.3 Record Configuration’ of the DVR. If you change it on Network Client, the DVR will change along with it. 2. Schedule Record The default value of Schedule Record is not active. STEP1 Click the check box of the Schedule Record, and it will be active. The default schedule time is every day. STEP2 Click "Set Schedule" button, and Schedule Configuration window will pop up as Fig 4.17 Schedule Configuration.
QSDF8204 Digital Video Recorder User Manual DISK MANAGEMENT Displays the information of the hard disk. FIRMWARE UPDATE DVR firmware can be updated remotely through Network Client software. STEP1 Select the path to the updating file. STEP2 Click "Start" button, the updating progress bar will appear. The Update dialog box is shown as Fig 4.18 Firmware Update. Fig 4.18 Firmware Update STEP3 After finishing the update, the DVR needs to reboot to run the new firmware. LOAD DEFAULT Load default setup.
QSDF8204 Digital Video Recorder User Manual 1. Channel Select the channel used by the PTZ camera. 2. Baud Rate Select the Baud Rate of the PTZ camera. The default value is 9600. 3. Protocol The communication protocol of PTZ camera. 4. Address The communication address of PTZ camera, also known as device ID Notice: Baud rate and protocol should be found in user’s manual of the PTZ camera PTZ CONTROL INTERFACE Fig 4.
QSDF8204 Digital Video Recorder User Manual CHAPTER 5 Operation with a Mouse 5.1 Switching Display Channels can be selected and altered using a Mouse. If the display is in multi-screen mode, clicking on a picture it will switch it to full screen; and if in full screen, clicking on an image it will change it to multi-screen mode. 5.2 Enter Menu List In live mode, by right clicking on the picture you can display the menu list.
QSDF8204 Digital Video Recorder User Manual FOCUS Click "FOCUS+" button to focus the Speed Dome further away. Click "FOCUS-" button to focus the Speed Dome closer. ZOOM Click "ZOOM+" and "ZOOM-" buttons to control the Speed Dome zooming in and zooming out. IRIS Click "IRIS+" and "IRIS-" buttons to increase and decrease the light in the image in the Speed Dome. Notice: , , right, left and down. and buttons are used to control the Speed Dome to move up, 5.2.
QSDF8204 Digital Video Recorder User Manual CHAPTER 6 Mobile Surveillance This DVR supports mobile surveillance by smart phones and PDAs with WinCE or Symbian operating systems that are on 3G networks. Among them, Dopod D600 (WM5) and Dopod S1(WM6) have been tested and fully certified that they worked well with the DVR. You need to setup the network configuration on the DVR before you can access mobile surveillance (Please see Chapter 4 Remote Surveillance).
QSDF8204 Digital Video Recorder User Manual STEP4 Click “Yes” to download and install. STEP5 PCam will be opened after installed. STEP6 Input the server’s address, ID, and password respectively in the columns of “Server”, “User”, and “Password”. Then click “Go” to login to the DVR. It will show the picture if accessed successfully.
QSDF8204 Digital Video Recorder User Manual STEP7 Camera 1 is the default display after login. Change the camera in the drop down menu of “Channel”. Notice: User name and password here are the same as that used on the DVR. The defaults are user name “admin” and password “123456”. 6.2 By Smart Phone with Symbian Operating System Please use smart phones or PDAs with Symbian version supported by this unit. STEP1 First, enable the network access on mobile phone, and then run Web browser.
QSDF8204 Digital Video Recorder User Manual STEP4 The security window will pop up after downloaded and ask if you want to install the package. Click YES to install. STEP5 A Scam shortcut icon appears on the system menu after finished. STEP6 Run Scam program.
QSDF8204 Digital Video Recorder User Manual STEP7 Click Options--->Settings to enter login interface. STEP8 Input the server’s address, ID and password respectively. Then click OK to login to the DVR. (See 4.1.2 Accessing the DVR over the Internet) STEP9 It will show the camera after accessing successfully. Notice: User name and password here are the same with that used on the DVR. The defaults are user name “admin” and password “123456”.
QSDF8204 Digital Video Recorder User Manual CHAPTER 7 Frequently Asked Questions Q1. Why is the DVR not starting after connecting the power? a. The adapter has been damaged. Please change the adapter b. The adapter is not producing enough power. Please remove the HDD to see if the DVR will start without it. If it does then replace the power adapter. c. Hardware problem with the DVR. Q2. The power indicator of the DVR is on, but no output. Why? a. The adapter is not producing enough power.
QSDF8204 Digital Video Recorder User Manual Q6. Mouse does not work, what could be wrong? a. Wait for 5 seconds after mouse connected then try. b. Not being identified. Plug/unplug several times. c. The mouse is incompatible. Please try a different mouse. Q7. Why can’t my system download ActiveX controls? a. IE browser blocks ActiveX. Please use the following setup to enable downloading. ① Open IE browser.
QSDF8204 Digital Video Recorder User Manual ③ Enable all the sub options under “ActiveX controls and plug-ins” ④ Then click OK to finish setup. b. Other plug-ins, firewalls, or anti-virus programs may block ActiveX. Please uninstall or close them. Notice: When the Network Client is running on VISTA operation system, you also need set relational ActiveX parameters. Steps for setting parameters are shown as follows: 1. Open IE browser, then select ‘Internet Options > Advanced > Security’ 2.
QSDF8204 Digital Video Recorder User Manual Appendix A Standards & Specifications Model VIDEO Input Level 4 Channel 4×BNC 1.0Vp-p±10%.75Ohm NTSC / PAL Video Standard Video Output Screen Split Control Display Resolution Speed AUDIO Compression Audio In/ Out Input Level RECORDING Compression Compression bit rate Resolution NTSC PAL Speed NTSC PAL Mode Motion detection HDD interface SEARCHING Searching Method REMOTE SURVEILLANCE Monitoring Environment NTSC PAL NTSC PAL 1×BNC 1.0Vp-p±10%.
QSDF8204 Digital Video Recorder User Manual Control Device PTZ control Front Panel, USB mouse, remote controller Panel, mouse remote controller or internet Appendix B Record Capacity The following table shows the record capacity of gross four channels recorded in one hour.
QSDF8204 Digital Video Recorder User Manual Q-SEE Product Warranty Thank you for choosing our products. All of our products have a conditional free warranty repair service for hardware within 12 months starting from purchase date, and a free exchange service within one month (valid for manufacturing defects). Permanent upgrading service is provided for the software.
QSDF8204 Digital Video Recorder User Manual Customer Information Card User’s Name Company Address Postal code Phone Number E-mail Model Number Serial Number Purchase Date Distributor 61
