User`s manual

QSD42908C8 User’s Manual
83
Fig 7.2 setup parameters
3. Select “Users/rights” under the “Security” menu item. The following dialog box will be
displayed.
Fig 7.3 Setup username
4. Create new user. Click “new user’. New user dialog box is displayed. Input user name
“target”. Click “OK”.
Fig 7.4 username
5. In the password dialog box input password “target” in “New Password” and “Verify
Password” edit box. Click “OK” to save and exit the dialog box.
Fig 7.8 Password
6. In the “User/Rights Security” Dialog, select “User Name” as “target”. In “Home
Directory” edit box, input the path where the firmware file (digicap) is placed. Then press “Done”
to exit.