Technical Manual

SPECIAL

The settings in the menu allow you to further customize your camera to suit your needs.

Language

You can chose from English, traditional Chinese or simpliﬁed Chinese.

CAM TITLE

0123456789

ABCDEFGHIJK

LMNOPQRSTUV

WXYZ ()

/=&~,.

CLR POS END

CAMERA_1

Camera Title

This allows you to create and display a name for the camera as well

as position it within the image. If you are using this camera with

a Q-See DVR, please note that this display is in addition to - and

separate from - the similar display available through the DVR which

can be turned on or off within the DVR. If the camera title is enabled,

“CAM 01” will also appear in the upper right hand corner. It will

appear, along with the name you chose on any video recorded from

this camera.

To enter text, use the multi-function button to navigate to the desired character and then press the button to enter it and the cursor

will advance to the next position in the name. The arrow buttons will allow you to move the cursor within the camera name. You may

enter up to 15 characters.

Use the arrow keys to move within the name. When complete, click on POS to position the name within the camera’s view. Once

you’ve positioned the name, press in on the multi-function button to exit.

Mirror

Use the options in this menu to rotate your camera’s view or ﬂip it either vertically or horizontally. This is useful in situations where

your camera cannot be positioned to provide a proper video image in the normal manner.

Motion Detection

Unlike most security cameras, your camera is capable of detecting motion by itself. If you are connecting your camera to a Q-See

security DVR, you will not need to enable this feature as the DVR itself has motion detection capabilities. We do not recommend

enabling motion detection on the camera while connected to a security DVR as it can produce adverse results by obscuring the

recorded video or generating artifacts which the DVR will interpret as motion causing it to record unnecessarily.

If you do chose to use it, there are three individually-conﬁgurable areas which you can select to notice motion. By default, items

moving within these areas will have red pixels tracking the object. You can adjust the sensitivity, size, and position of these areas

along with whether the areas themselves will appear on-screen.