QUICK INSTALLATION GUIDE FOR CIF DVR 4 CH MODEL QH25DVR4C Part 1- Package contents: Part 2 – DVR Camera and Power Connections
Part 3 – Connecting the DVR to your TV Part 4 – DVR Controls: Front Panel Part 5 – Accessing the DVR menus To access the settings on the DVR push Menu button on the front of the DVR or on the remote. This will display the above Screen. The default user is admin and the Default password is 12345. To enter this Password press the shift key and then the number on the DVR or remote. Then press the enter button twice. This will bring up the main menu screen shown above.
Part 6 – Setting up DVR to record There are 3 modes for recording: 1. Manual recording: Push Shift button, then hit the RECORD button. Enter name and password (default is admin and 12345) as in Part 5. This will display the screen below: In Start/Stop heading use arrow keys & enter button to put check marks in all cameras you want to record on, or you can select Start All option to record on all cameras.
3. Time Schedule Recording. Follow instructions in part 5 to go to main menu. Now go to RECORDING (green square in Pic 1) and hit Enter, this will bring up the screen in Pic 6. Go down to ENABLE REC (green square) and put a CHECK mark in it. Go to SCHEDULE (orange square) and hit enter. This will display the screen in Pic 7. Select a day and then Select ALL DAY (red square). Set record type to All Time (green square). Set the Schedule start and End time for each day (yellow square).
If you have questions: Contact Us: Mailing Address: DPS Inc. 8015 E. Crystal Dr Anaheim, CA 92807 Website: http://www.q-see.com Fax: 714-998-3509 Customer Service: Phone: 877-998-3440 x 538 Email: cs@dpsi-usa.com Tech Support: Phone: 877-998-3440 x 539 Email: ts@dpsi-usa.