Technical Manual

10
OPERATION
Page 1 Page 2
The On Screen Display (OSD) built into your camera allows you to control almost every aspect of how it captures images. Using the
built-in menus, you can control brightness, contrast, white balance, shutter speed and other functions.
It should be noted that these settings must be made at the camera itself and they cannot be set remotely. When used with a security
DVR system, what you see on the screen will be what is recorded - including the OSD menu. In fact, use of the OSD can trigger
motion detection so it may be advisable to temporarily disconnect/disable alarms or notifications when working in the OSD menu.
When saved using the “Save All” command, settings will be stored on the camera even in the event of power loss. Once power is
restored, the camera will continue to operate according to your settings. You can revert to the factory default settings by selecting
“Camera Reset” in the menu.
SETUP MENU
Pressing the multi-function or Menu button (depending on model) will open the OSD to the first page of the Setup Menu. The menu
will appear over the video image being delivered by the camera.
To change a setting, scroll to the desired item until it is highlighted and press right or left to select the desired value. Menu options
with a “ ” indicate that there is a submenu. Clicking on an item with that option will take you to the submenu. Move between the two
pages using NEXT or BACK as appropriate.
SETUP MENU
LENS MANUAL
SHUTTER/AGC AUTO
WHITE BAL ATW
BACKLIGHT OFF
PICT ADJUST
ATR OFF
MOTION DET OFF
NEXT
EXIT SAVE ALL
SETUP MENU
PRIVACY OFF
DAY/NIGHT AUTO
NR
CAMERA ID OFF
SYNC INT
LANGUAGE ENGLISH
CAMERA RESET
BACK
EXIT SAVE ALL