Manualshelf

Instructions / Assembly

ManualsBrandsQ-SEE ManualsSmart Home4-Channel 3MP 1TB Wi-Fi Surveillance NVR with 4 Indoor/Outdoor Dome Security Cameras and Wi-Fi Extender
12345678910
Step 5: Connect to the Router
A. Plug the included Network (Ethernet) cable into the
Network (LAN) port on the back of the NVR.
B. Connect the other end of the cable to an open port
on your router (not included). You will hear a click
when the cable is properly connected.
Step 6: Powering Up the NVR &
Cameras
A. Plug the NVR power supply
cord into the DC Port on
the back of the NVR.
C. The NVR may beep as it powers up and the
cameras may make a faint clicking noise when
powering on. The Startup Wizard will appear on-
screen after a few minutes.
8
B. Plug the cameras and NVR power supplies into a
surge protector.