Instructions / Assembly

5
Get Connected
Step 1: Registration
The rst step is to register your device on the Q-See
Support Portal at: www.q-see.com/register
Register your device to enjoy the following features:
• You will receive regular updates about the latest
rmware version of your NVR and cameras.
• Registering your product will streamline warranty
claims and support requests by syncing your
registered product with your account.
• You will receive tailored support for your devices.
• You can easily nd other Q-See products that are
compatible with your devices.
Step 2: Connect Your Cameras
A. Slide the included rubber grommet onto the antenna
stem of the camera. Screw the supplied Wi-Fi
antenna on to the bullet or dome camera.
IMPORTANT: Go through all of the steps to setup and test
your system before mounting any cameras or hardware.
Always visit www.q-see.com/support to nd the most recent
guides and up to date support for your Q-See products.