Instructions / Assembly

30
Troubleshooting
Testing for Power & Night Vision
After you connect your camera to the NVR and power, if
you do not see a video image on screen and your NVR
does not display a “video loss” message, you should test
your camera to ensure it is properly connected.
1. With your camera(s) still connected to power, cover
the lens end of your camera with your hand or an
object to completely block it.
2. Keep the lens blocked for 10 seconds. You should see
a faint red glow from the infrared LEDs. This indicates
that your camera has power and is working properly.
Advanced troubleshooting and information
is all available on our website at:
www.q-see.com/support
Setting Up a Wi-Fi Camera Without
an NVR
Go to www.q-see.com/support and search for answer
ID 3009 for steps to set up a camera on a dierent Wi-
Fi network or to setup a Wi-Fi camera independently
without an NVR.