Instructions / Assembly

27
Network Cable
Please do not worry about the additional network cable
on your camera. This network cable connection can
alternatively be used to hard-wire the camera using an
Ethernet cable instead of a Wi-Fi connection. Please
make sure that this cable is never exposed to moisture.
Dome Camera Lens Adjustment
The lens of your dome camera can be adjusted based
on where you are mounting it by gently loosening its
screw and rotating the angle and orientation of the
camera. The LEDs denote the bottom half of the camera,
so be sure to rotate the lens accordingly or the camera
view will be sideways. The center blue sensor should
point directly down when mounted.