Instructions / Assembly

25
Bullet Camera Micro SD Card
The SD memory card slot is located under the bottom
panel of the camera. Push the card in rmly to load the
card. To eject, press the card rmly again. Some units
will include a micro SD card.
Bullet Camera Reset Button
If you wish to connect to a dierent Wi-Fi network, while
the camera is powered on, hold the reset button for ve
seconds and setup your camera again.
NOTE: The micro SD memory card slot and reset button can both be accessed by removing the bottom panel
from the camera with a standard Phillips screwdriver. Reattach the panel before mounting cameras.