Instructions / Assembly
15
C. The Q-See Startup Wizard is complete. To prevent
the wizard from appearing after each reboot,
uncheck the Startup box and click OK.
OS X, Mac Users
Step 1
Go to www.q-see.com/support and search for answer
ID “2799” to download the latest QC View software.
Click the Downloads button and, once fully downloaded,
double-click QC View.pkg to open the le.
QC View On Your
Computer
NOTE: If the Live Preview is unsuccessful and no camera feed
is available, check the Troubleshooting section on page 30 of
this guide to verify the camera is activating.
NOTE: If during the install process you see a message that the le is
from an unidentied developer, click
OK and refer to answer ID 2634 at
www.q-see.com/support for info on
allowing installations from unidentied
developers.