Owners manual

GET CONNECTED

Find the desired location for your camera to be placed. If you are going to

be mounting the camera, please use the included mounting hardware to

secure the camera rmly to the wall. Please make sure to go through all

steps and test the system completely before mounting the cameras.

You are now ready to setup the camera. Once

the camera is plugged in you may see a red LED

power indicator light up. Later when connected

to Wi-Fi this LED should turn green .

• Slide the included rubber grommet onto the antenna stem of the camera

• Screw the supplied Wi-Fi antenna on to the dome camera

• Plug in the included power supply to a surge protector and plug in the

power supply to the Wi-Fi dome camera.