Instructions / Assembly

14
If you would like to add this camera to your existing QC Series NVR,
login to your NVR and go to Remote Devices. Select your camera
from the device list and click Add. The camera feed will appear on
your NVR. The NVR has to be connected to the same network as
your mobile device for the initial setup process.
Visit www.q-see.com/support to verify if your system is compatible.
*This screenshot is from a QC Series NVR.
STEP 7
ADD TO AN EXISTING QC NVR SYSTEM
15
The lens of your dome camera can be adjusted based
on where you are mounting it by gently loosening its
screw and rotating the angle and
orientation of the camera. The
LEDs denote the bottom half
of the camera so be sure to
rotate the lens accordingly or
the camera view will be
sideways. The center
blue sensor should point
directly down when
mounted.
LENS ADJUSTMENT