3MP WI-FI SECURITY CAMERA QUICK START GUIDE ENGLISH
WELCOME! Congratulations on your latest purchase and welcome to the Q-See family. This guide will help get your camera up and running. WHAT’S INCLUDED • (1) QCW3MP16 Wi-Fi Camera • (1) USB Power Adapter • (1) Micro USB Cable • (1) Mounting Sticker • (1) Mounting Hardware STEP 1 Before installing, please register your device on the Q-See Support Portal at www.q-see.com/register to receive critical updates and support for your system.
STEP 2 Plug the power adapter into a surge protector and plug the micro USB end of the cable into the camera and wait until the indicator light begins to flash. After 15-30 seconds the light should slowly flash green which indicates it is ready to configure. If the light displays red, hold the reset button for 15 seconds to reset the camera. IMPORTANT: Go through all of the steps to setup and test your system before mounting your camera. Visit www.q-see.
STEP 5 Enter an email address to use for your account. You should immediately receive an email with a verification code. You will have two minutes to enter the verification code, so be sure you will have quick access to the email address used. Tap Send verification code to mail. STEP 6 Enter the verification code and click Next. 4 STEP 7 Create a password for your account. You will enter the same password twice to confirm. Tap Register Again to continue.
STEP 9 Tap the + symbol to continue. In the following screen, select “Wi-Fi Camera” for device type. Next, using your mobile device’s camera, scan the QR code on the back of the Wi-Fi camera. STEP 10 Once the QR code scans, a new screen will appear with login credentials. Do not edit any of the credentials. Do not enter a verification code. Tap OK to continue. STEP 11 In the next screen, tap “Yes, config Wi-Fi”.
Back to device screen Q-SEE PLUS FEATURES: LIVE VIEW SCREEN Device settings Video history and playback Enable or disable motion recordings (turns push notifications on or off) Toggle standard definition or high definition Start or stop live feed Turn audio on or off Record video to your device Save photo snapshot to your device 6 View multiple channels (recorder required) Enable full screen Enable two-way talk Enable pan tilt (PT camera required)
Q-SEE PLUS FEATURES: DEVICE SCREEN Add new device Device settings Camera name Video history and playback Cloud settings Alerts/Alarm messages Your Q-See Plus account preferences Your device list 7
CAMERA FEATURES SPEAKER The 3MP Wi-Fi Security Camera features an adjustable magnetic base which can be easily attached to any metal surface, or mounted with metal screws to the desired location. The LED indicator light will ensure that your camera is connected to Wi-Fi. A flashing green light means it is ready to connect. A solid green light means it is connected to a Wi-Fi network. A red light indicates that there is problem with the connection.
PORTS & RESETTING YOUR CAMERA Your camera’s micro USB port is conveniently located beneath the QR code on the back of the housing, and the micro SD memory card slot is found on the bottom of your camera for easy access. Your device also comes with a “reset” button situated at the back of the camera (beneath the bar code), allowing you to easily change Wi-Fi networks, or deal with any connectivity issues that you may encounter.
Regulatory Information FCC Information This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Attention that changes or modification not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Rev.
