Technical Manual

28 29
Mounting Instructions
1. Run the included 100’ network cable from the
NVR to the camera’s location or a network port.
2. Use the mounting bracket to mark the position
for the mounting holes. Ensure that the camera
will be horizontal by using a spirit or bubble
level. Also mark location of hole for cables to
pass through the mounting surface.
3. Drill the mounting and cable holes.
4. Insert included mounting anchors into surface.
5. Screw mounting collar onto camera body.
6. Feed the cables through the mount and out the
hole in the back before securing the camera/
collar assembly to the mounting bracket.
7. Tighten the three retaining screws on the collar
so that the camera housing does not turn.
8 Connect the camera cables to the extension
cable.
9. Secure the camera and mount assembly to the
wall using the included screws.
7
9
PICTURE 1-22
OPERATION
The Quick Installation Poster that came with your camera provides basic instruction on
how to connect, program and operate your camera. Further detailed instruction is provided in
the User Manual included on the CD that also accompanied your NVR.
MICRO SD CARD
The QCN8014Z also has a slot for a Micro SD card on the camera head, next to the lens (See
Picture 1-20) which allows the camera to record images and video when it is operating on
its own network (ie; not directly connected to the NVR with the Ethernet cable. Please see
Section 3.5 for instructions on recording with an SD card.
SPECIFICATIONS
NOTE! Unlike an analog PTZ camera, an IP PTZ camera does not need a
RS485 connection to the recorder to control its movements. Control signals
will be sent to the camera via the attached Ethernet cable whether the camera
is directly connected to an NVR or remotely connected via the Internet.
Camera Type PTZ Extreme Weather
Camera Technology IP ONVIF Profile S
Image Sensor size 1/3 inch Sony Exmor
Image Sensor Type CMOS
Image Resolution 1920 x 1080
Megapixels (digital) 2
Effective Pixels 1944 x 1092
Lens Size 5.1mm to 61.2mm (12X Optical Zoom-16X Digital Zoom)
Angle of View (horizontal) 5° to 51°
IR Cut Filter Yes
Night Vision
IR LEDS None
Infrared Wavelength Not Applicable
Min Lux Illumination Color 0.05/B&W 0.005 F1.6 Auto ICR
Night Vision Range Not Applicable
Additional Image Features
Auto Iris None
On Screen Display No
Backlight Compensation Yes BLC/HLC
Electronic Shutter 1/3s – 1/30,000s
Gain Control Auto/Manual
Wide Dynamic Range DWDR
Noise Reduction 2D/3D