Quick Installation Guide 8 Channel H.
Q-SEE QUICK INSTALLATION GUIDE MODEL NUMBER QS218-411 PART 1 - PACKAGE CONTENTS: 8 - Color CMOS Cameras with Stands Software CD QS218 DVR (4) QSM1424C (6mm Lens) (4) QSM1424W (3.6mm Lens) Pre-Installed Hard Drive Power Supply for DVR Power Supply & 8 -Way Splitter For Cameras Camera Cables (8 Included) BNC (M) - RCA (F) Adapters (2 Included) Ethernet Cable USB 2.
Q-SEE QUICK INSTALLATION GUIDE MODEL NUMBER QS218-411 PART 2 - DVR CAMERA AND POWER CONNECTIONS Please note that it is STRONGLY recommended to use a surge protector that is UL-1449 rated. Look for a clamping voltage of 330 or lower, a Joule rating of at least 400 and a response time of 10 nanoseconds or less. WARNING: Power supply for DVR is 19 Volt, power supply for CAMERAS is 12 Volt, make sure you use the correct power supply for the correct device.
Q-SEE QUICK INSTALLATION GUIDE MODEL NUMBER QS218-411 PART 4 - CONNECTING THE DVR TO YOUR TV 1. Plug the BNC to RCA adapter in to Video Out port then connect the RCA cable (not included) to the DVR. 2. Connect the other end of the RCA cable to the Video Input on the TV if you are using a television screen. 3. If you are using a PC monitor, plug the VGA cable (not included) to the VGA port on the DVR. 4. Connect the other end of the VGA cable to the monitor.
Q-SEE QUICK INSTALLATION GUIDE MODEL NUMBER QS218-411 PART 5 - DVR CONTROLS: FRONT PANEL Item Number Name/Symbol 1 STANDBY Press to set the system in standby mode. 2 IR SENSOR IR Receiver for remote control. 3 LED INDICATORS 4 CHANNEL/NUMBER S/ PLAYBACK 5 MENU EXIT Description Shows status of hard drive, recording, alarm, HDD full and network. Press buttons 1-8 to view the selected channel full-screen; press buttons 1-0 to input passwords and user IDs. Press to open/close the main menu.
Q-SEE QUICK INSTALLATION GUIDE MODEL NUMBER QS218-411 PART 6 - ACCESSING THE DVR MENUS Choose MENU by right clicking on the mouse or by pushing the MENU button on the DVR front panel or remote control. The Main Menu offers the following Setup Features: SEARCH: Search for recorded video on the system. RECORD: Enable recording & audio, set resolution & quality, recording mode and file size.
Q-SEE QUICK INSTALLATION GUIDE MODEL NUMBER QS218-411 Grid Explanation: Red = Alarm (motion detection) recording Green = General (time schedule) recording Transparent = No recording Blue = The channel and date selected. Manual Recording: From the Record Setup screen set the Rec Mode to “ALWAYS”. Your DVR will continuously record and separate files will be created with the Pack Time intervals you selected.
Q-SEE QUICK INSTALLATION GUIDE MODEL NUMBER QS218-411 The Motion Detection Menu has 3 sections, including Channel Status, Sensitivity and Motion Area. Status: This option allows you to enable motion detection on any channel. Sensitivity: This option allows you to set sensitivity level of motion detection from 1 to 4, with 4 being the highest. MD Area: Allows you to set the area of the camera view that you want to be sensitive to motion.
Q-SEE QUICK INSTALLATION GUIDE MODEL NUMBER QS218-411 File List: On the Search Menu click the Search button then click File list to display the sub-menu shown in the picture on the left. This option will allow you to view all of the available files by channel and type (all, normal, or alarm). You can click on a file to playback the file.
Q-SEE QUICK INSTALLATION GUIDE MODEL NUMBER QS218-411 Questions or Comments? Contact Us: Mailing Address: Customer Service: DPS, Inc. 8015 E. Crystal Dr. Anaheim, CA 92807 Phone: 877-998-3440 x 538 Email: cs@dpsi-usa.com Live Chat from our Website Website: Tech Support: http://www.q-see.com Fax: 714-998-3509 Phone: 877-998-3440 x 539 Email: ts@dpsi-usa.
