Error! Use the Home tab to apply 标题 1 to the text that you want to appear here. Error! Use the Home tab to apply 标题 1 to the text that SuperDVR & QSDT8PCRC User Manual you want to appear here. CONTENTS 1.1 Summarization............................................................................................... 5 1.2 System Requirements ................................................................................... 7 1.3 Card Specifications .........................................................
Error! Use the Home tab to apply SuperDVR & QSDT8PCRC Cards User Manual 标题 1 to the text that you want to appear here. Error! Use the Home tab to apply 标题 1 to the text that you want to appear here. 7.3.2 Delete Recorded Files ................................................................................................. 48 7.3.3 Capture Pictures .......................................................................................................... 49 7.3.4 Image Zoom in/out.........................
Error! Use the Home tab to apply 标题 1 to the text that you want to appear here. Error! Use the Home tab to apply 标题 1 to the text that you want to appear here. SuperDVR & QSDT8PCRC User Manual Appendix 2.4.2 Why I can’t find the recorded files? ............................................................... 94 Appendix 2.4.3 Why is the screen’s display unstable with dithering and water-wave images? 94 Appendix 2.4.4 Why does it delay playing back, and why is it slow to close and open the driver? ........
Error! Use the Home tab to apply SuperDVR & QSDT8PCRC Cards User Manual 标题 1 to the text that you want to appear here. Error! Use the Home tab to apply 标题 1 to the text that you want to appear here. 1 Introduction 1.1 Summarization Thank you for choosing our digital video capture cards. The QSDT8PCRC 8 Channel cards use software H.264 compression format, and enable a maximum of 16 channels real-time surveillance in CIF resolution.
Error! Use the Home tab to apply 标题 1 to the text that you want to appear here. Error! Use the Home tab to apply 标题 1 to the text that you want to appear here. SuperDVR & QSDT8PCRC User Manual enabled, recording will automatically stop. P.T.Z control function Supports many protocols. Users can control multiple speed domes and integrative cameras, including pan, tilt, zoom, focus and iris adjustment for P.T.Z devices. Supports preset points and auto scout.
Error! Use the Home tab to apply SuperDVR & QSDT8PCRC Cards User Manual 标题 1 to the text that you want to appear here. Error! Use the Home tab to apply 标题 1 to the text that you want to appear here. 1.2 System Requirements NOTE: If recorded disk partition’s format is FAT32 and the system has run for a long time, the system will create a lot of data fragments that may result in system running slowly. It’s recommended to run a disk defragmenter every 10 to 30 days.
Error! Use the Home tab to apply 标题 1 to the text that you want to appear here. Error! Use the Home tab to apply 标题 1 to the text that SuperDVR & QSDT8PCRC User Manual you want to appear here. PTZ Remote Software interface Protocol Configurable, Remote Control Capability Support Internet Explorer Web Browser PCI-E 2 Hardware Installation 2.1.
Error! Use the Home tab to apply 标题 1 to the text that you want to appear here. Error! Use the Home tab to apply 标题 1 to the text that SuperDVR & QSDT8PCRC Cards User Manual you want to appear here. 3 Hardware Installation 3.1 Video Capture Card Hardware 3.1.
Error! Use the Home tab to apply 标题 1 to the text that you want to appear here. Error! Use the Home tab to apply 标题 1 to the text that SuperDVR & QSDT8PCRC User Manual you want to appear here.
Error! Use the Home tab to apply SuperDVR & QSDT8PCRC Cards User Manual 标题 1 to the text that you want to appear here. Error! Use the Home tab to apply 标题 1 to the text that you want to appear here. Figure3-5 Pins Definition of Alarm Board Connect J2 to PC serial port and you can use alarm board on SuperDVR system. 3.1.3 Connect Audio Signal For QSDT8PCRC, connect the audio input device to the microphone connector on the motherboard.
Error! Use the Home tab to apply 标题 1 to the text that you want to appear here. Error! Use the Home tab to apply 标题 1 to the text that SuperDVR & QSDT8PCRC User Manual you want to appear here. Figure3-6 H.
Error! Use the Home tab to apply 标题 1 to the text that you want to appear here. Error! Use the Home tab to apply 标题 1 to the text that SuperDVR & QSDT8PCRC Cards User Manual STEP3 you want to appear here. ： Install driver first.
Error! Use the Home tab to apply 标题 1 to the text that you want to appear here. Error! Use the Home tab to apply 标题 1 to the text that SuperDVR & QSDT8PCRC User Manual you want to appear here. STEP5 STEP6 ： Select a folder or use the default SuperDVR, and click ‘Next’. ： Click ‘Next’. Figure3-11 Selecting program folder Figure3-12 Driver and Application Installation Finished ： Click ‘Finish’. STEP8： After all the processes are finished, it will create a shortcut on the STEP7 desktop.
Error! Use the Home tab to apply 标题 1 to the text that you want to appear here. Error! Use the Home tab to apply 标题 1 to the text that SuperDVR & QSDT8PCRC Cards User Manual you want to appear here. installing the driver software on Microsoft VISTA systems are the same as on Microsoft XP systems. Figure3-14 Installing the Software on VISTA In cases where users cannot run the SuperDVR program, restart the computer. You also need to disable the new user access control function in Vista.
Error! Use the Home tab to apply 标题 1 to the text that you want to appear here. Error! Use the Home tab to apply 标题 1 to the text that SuperDVR & QSDT8PCRC User Manual you want to appear here. 4 Main Display Interface Run the SuperDVR program and the main display appears as shown below: Figure4-1 SuperDVR Main Display Interface 4.1 Display Control Panel 4.1.
Error! Use the Home tab to apply 标题 1 to the text that you want to appear here. Error! Use the Home tab to apply 标题 1 to the text that SuperDVR & QSDT8PCRC Cards User Manual you want to appear here. 4.1.4 Auto Dwell Display Mode If users want to see all the channels in sequence, then click Auto Dwell display mode. to enter 4.1.5 Capture If users want to capture a picture from the screen they can click , the system will save 32 pictures to the default folder on the disk, c:\ path. 4.1.
Error! Use the Home tab to apply 标题 1 to the text that you want to appear here. Error! Use the Home tab to apply 标题 1 to the text that SuperDVR & QSDT8PCRC User Manual you want to appear here. 4.3 Record 4.3.
Error! Use the Home tab to apply SuperDVR & QSDT8PCRC Cards User Manual 标题 1 to the text that you want to appear here. Error! Use the Home tab to apply 标题 1 to the text that you want to appear here. 4. Manual Recording Frame Rate Select the recording frame rate for manual record mode. 5. Schedule Record This option allows you to record on a set schedule. 6. Schedule Record Frame Rate Select Schedule Recording frame rate. 7.
Error! Use the Home tab to apply 标题 1 to the text that you want to appear here. Error! Use the Home tab to apply 标题 1 to the text that SuperDVR & QSDT8PCRC User Manual you want to appear here. • Red light: Sensor Alarm Record State • Blue light: Video Loss State When the indicator light color turns into red an alarm output. in row two, it means there is 4.3.4 Manual Record Mode Manual Record mode is the most commonly used recording mode.
Error! Use the Home tab to apply 标题 1 to the text that you want to appear here. Error! Use the Home tab to apply 标题 1 to the text that SuperDVR & QSDT8PCRC Cards User Manual you want to appear here. 4.3.7 Schedule Recording Users can set working schedule for all of the recording modes in ‘Schedule Configuration’. The dark green light in record status panel shows the corresponding channel is in Schedule Record mode.
Error! Use the Home tab to apply 标题 1 to the text that you want to appear here. Error! Use the Home tab to apply 标题 1 to the text that SuperDVR & QSDT8PCRC User Manual you want to appear here. 5 Click System Setup to enter the main setup interface. Figure5-1 Basic Configuration The definitions of the buttons in Figure5-1 are shown below: Basic Configuration Schedule configuration Video configuration Motion Detection Configuration Alarm Configuration P.T.
Error! Use the Home tab to apply SuperDVR & QSDT8PCRC Cards User Manual 标题 1 to the text that you want to appear here. Error! Use the Home tab to apply 标题 1 to the text that you want to appear here. Figure5-2 Caption and General Configuration 1. Dwell Interval. If users enable Auto Dwell function on the main interface page, users can set the dwell time, in seconds, of a screen here. 2. Caption There are four options, None, ID, Name, and ID/Name for users to select for all the channels.
Error! Use the Home tab to apply 标题 1 to the text that you want to appear here. Error! Use the Home tab to apply 标题 1 to the text that SuperDVR & QSDT8PCRC User Manual you want to appear here. In the following area in the basic configuration page, users can input the computer user name and password in the relative boxes. Then when restarting the computer system, it will give access to the system with the user name and password that was put in the boxes.
Error! Use the Home tab to apply 标题 1 to the text that you want to appear here. Error! Use the Home tab to apply 标题 1 to the text that SuperDVR & QSDT8PCRC Cards User Manual you want to appear here. Figure5-5 Video Configuration Definitions of the setup items: 1. Contrast Set image color contrast. 2. Brightness Set image brightness. 3. Hue Set image hue. 4. Saturation Set image Saturation 5. Default Load defaults, i.e. reset the value of the first four items. The range of values is from 0—255. 5.
Error! Use the Home tab to apply 标题 1 to the text that you want to appear here. Error! Use the Home tab to apply 标题 1 to the text that SuperDVR & QSDT8PCRC User Manual you want to appear here. Figure5-6 Motion Detection Configuration Definition of the setup items: 1. Sensitivity Users can set motion detection sensitivity here. 2. Speed Motion detection speed 3. Block Number Set grid’s number. 4. Defaults Reset to default settings. 5.
Error! Use the Home tab to apply 标题 1 to the text that you want to appear here. Error! Use the Home tab to apply 标题 1 to the text that SuperDVR & QSDT8PCRC Cards User Manual you want to appear here. 5.4 Schedule Configuration Click to enter the Schedule Configuration page as shown below: Figure5-7 Schedule Configuration Our H.264 series cards have powerful schedule configuration options. Every channel has three kinds of recording modes, i.e.
Error! Use the Home tab to apply 标题 1 to the text that you want to appear here. Error! Use the Home tab to apply 标题 1 to the text that SuperDVR & QSDT8PCRC User Manual you want to appear here. Figure5-8 Edit Schedule 5.5 Motion Detection Alarm Configuration 5.5.1 Alarm Triggering Conditions Configuration The system can receive alarms from both local place and network. Local Alarm Record Triggering Configuration Figure5-9 Local Alarm Triggering Configuration Explanation of options: 1.
Error! Use the Home tab to apply 标题 1 to the text that you want to appear here. Error! Use the Home tab to apply 标题 1 to the text that SuperDVR & QSDT8PCRC Cards User Manual you want to appear here. 5.5.2 Alarm Record Figure5-10 Alarm Trigger Method Configuration Every sensor can trigger multiple channels to record. For example, if users select CAM1, CAM4 and CAM5 for Sensor2, then once the sensor is activated, CAM1, CAM4 and CAM5 will begin to record.
Error! Use the Home tab to apply 标题 1 to the text that you want to appear here. Error! Use the Home tab to apply 标题 1 to the text that you want to appear here. SuperDVR & QSDT8PCRC User Manual HDD space shortage alarm. 1. Video Loss Users can select alarm output for this option. For example, users select alarm_out1 and alarm_out3 for video loss.
Error! Use the Home tab to apply SuperDVR & QSDT8PCRC Cards User Manual 标题 1 to the text that you want to appear here. Error! Use the Home tab to apply 标题 1 to the text that you want to appear here. Figure5-12 Auto Mail Setup Interface In this area, users can set receiver and sender’s E-mail SMTP server and address. Note: the address of receiver and sender can be the same. Figure5-13 Auto Mail Setup To test the settings, click ‘Send Mail Test’.
Error! Use the Home tab to apply 标题 1 to the text that you want to appear here. Error! Use the Home tab to apply 标题 1 to the text that SuperDVR & QSDT8PCRC User Manual you want to appear here. Figure5-14 Attachment Setup NOTICE: For every alarm event, only one picture will be sent. 5.6 E-map Configuration E-map is used to show full geographic range covered by the whole monitoring system in the form of map.
Error! Use the Home tab to apply SuperDVR & QSDT8PCRC Cards User Manual 标题 1 to the text that you want to appear here. Error! Use the Home tab to apply 标题 1 to the text that you want to appear here. Figure5-15 E-Map Edit Drag the icon of a camera to the corresponding position on the map, a maximum of 32 cameras can be set simultaneously, Click ‘change icon’ of camera by right key to change icon and click ‘Delete’ to cancel camera.
Error! Use the Home tab to apply 标题 1 to the text that you want to appear here. Error! Use the Home tab to apply 标题 1 to the text that SuperDVR & QSDT8PCRC User Manual you want to appear here. Figure5-16 View Cameras When a channel alarm is triggered, the camera icon will flash a yellow alarm signal. Select ‘Auto Show’, in case of an accidental alarm, an alarming screen will pop out automatically and you can know about the alarming position immediately.
Error! Use the Home tab to apply 标题 1 to the text that you want to appear here. Error! Use the Home tab to apply 标题 1 to the text that SuperDVR & QSDT8PCRC Cards User Manual you want to appear here. 5.7 P.T.Z Control Configuration Click and enter PTZ Configuration: Figure5-17 PTZ Configuration Panel 5.7.1 Protocol Setup Users can select different protocols, serial port number for P.T.Z devices. The settings you enter here must match the setting on the PTZ camera. Figure5-18 P.T.Z Protocol Setup 1.
Error! Use the Home tab to apply 标题 1 to the text that you want to appear here. Error! Use the Home tab to apply 标题 1 to the text that SuperDVR & QSDT8PCRC User Manual you want to appear here. DSCP, DH-SD, Lilian, Minking, Neon, PelcoD, PelcoP, Star, VIDO, VISCA 3. Address Communication address of P.T.Z device (ID number) 5.7.2 Serial Ports Setup Users should first enable the P.T.Z control function of a certain camera and select a port number in P.T.
Error! Use the Home tab to apply 标题 1 to the text that you want to appear here. Error! Use the Home tab to apply 标题 1 to the text that SuperDVR & QSDT8PCRC Cards User Manual you want to appear here. 5.8 Users Configuration Click to access the User’s Configuration area: Figure5-20 User configuration After installing the SuperDVR program, it will automatically create an administrator user with the user name SYSTEM with no password.
Error! Use the Home tab to apply 标题 1 to the text that you want to appear here. Error! Use the Home tab to apply 标题 1 to the text that SuperDVR & QSDT8PCRC User Manual you want to appear here. • Administrator: this user has the right to change all the settings and playback. This user also has the right to assign users power user rights and normal user rights. • Power User: This type of user is authorized by the administrator.
Error! Use the Home tab to apply SuperDVR & QSDT8PCRC Cards User Manual 标题 1 to the text that you want to appear here. Error! Use the Home tab to apply 标题 1 to the text that you want to appear here.
Error! Use the Home tab to apply 标题 1 to the text that you want to appear here. Error! Use the Home tab to apply 标题 1 to the text that SuperDVR & QSDT8PCRC User Manual you want to appear here. 6 P.T.Z Control Click in the SuperDVR main display interface (refer to Figure4-1) to access the P.T.Z control area: Figure6-1 P.T.Z Control Interface Users can control P.T.Z. devices by the function buttons on the right side, shown below: Figure6-2 P.T.Z.
Error! Use the Home tab to apply 标题 1 to the text that you want to appear here. Error! Use the Home tab to apply 标题 1 to the text that SuperDVR & QSDT8PCRC Cards User Manual you want to appear here. camera. NOTICE: After pressing left mouse button on any function button in P.T.Z Control Function Panel (refer to Figure6-2), PTZ camera starts moving, when user releases it, PTZ camera stops moving.
Error! Use the Home tab to apply 标题 1 to the text that you want to appear here. Error! Use the Home tab to apply 标题 1 to the text that SuperDVR & QSDT8PCRC User Manual you want to appear here. Figure6-4 Preset and Group Select Click to set Preset point and change Preset point name. Every Group includes multiple Preset points. If users select preset1, preset2 and preset3 for group1, preset1, preset2 and preset3 will be automatically accessed in sequence after users select group1 for auto scout.
Error! Use the Home tab to apply 标题 1 to the text that you want to appear here. Error! Use the Home tab to apply 标题 1 to the text that SuperDVR & QSDT8PCRC Cards User Manual you want to appear here. 7 Record Search & Playing Back Click in the SuperDVR Main Display Interface (refer to Figure4-1) and access the following areas: Figure7-1 Search and Playback Interface This interface is divided into 4 parts, record search area, record playback area, record play area, and other functions area.
Error! Use the Home tab to apply 标题 1 to the text that you want to appear here. Error! Use the Home tab to apply 标题 1 to the text that SuperDVR & QSDT8PCRC User Manual you want to appear here. 7.1 Record Search Figure7-2 Record Search Area A, B and C marks the areas of the three search methods. • A: Search by date • B: Search in backup file and original file • C: Search by recording mode. This is useful when user wants to look through some important events.
Error! Use the Home tab to apply 标题 1 to the text that you want to appear here. Error! Use the Home tab to apply 标题 1 to the text that SuperDVR & QSDT8PCRC Cards User Manual you want to appear here. Explaination of the button functions: • : Play / Pause • : Stop • : Reverse. This button is valid when playing back by single channel : Previous Section. This button is valid when playing back by single • channel • : Next Section.
Error! Use the Home tab to apply 标题 1 to the text that you want to appear here. Error! Use the Home tab to apply 标题 1 to the text that SuperDVR & QSDT8PCRC User Manual you want to appear here. are the definitions of the color bars: • • • • Click Blue: Manual Record Events Green: Schedule Record Events Yellow: Motion Detection Record Events Red: Sensor Alarm Record Events to play selected recorded files. The system offers playback in 1 Ch, 4CH, 9 CH, and 16CH.
Error! Use the Home tab to apply SuperDVR & QSDT8PCRC Cards User Manual 标题 1 to the text that you want to appear here. Error! Use the Home tab to apply 标题 1 to the text that you want to appear here. ‘Third 4 Channels’ , Camera9, Camera10, Camera11, and Camera12 will be quickly be selected simultaneously.
Error! Use the Home tab to apply 标题 1 to the text that you want to appear here. Error! Use the Home tab to apply 标题 1 to the text that SuperDVR & QSDT8PCRC User Manual you want to appear here. Figure7-11 Recorded Files Backup Users can select corresponding cameras and copy the recorded files to another path in this area. This is the file backup function of the system.
Error! Use the Home tab to apply SuperDVR & QSDT8PCRC Cards User Manual 标题 1 to the text that you want to appear here. Error! Use the Home tab to apply 标题 1 to the text that you want to appear here. 7.3.3 Capture Pictures The definitions of the function buttons are shown below: : Capture picture : Print setup : Print captured picture NOTICE: This single channel.
Error! Use the Home tab to apply 标题 1 to the text that you want to appear here. Error! Use the Home tab to apply 标题 1 to the text that SuperDVR & QSDT8PCRC User Manual you want to appear here. Select path and click ‘Save’ to save the picture. User can also print the images that have been captured.
Error! Use the Home tab to apply 标题 1 to the text that you want to appear here. Error! Use the Home tab to apply 标题 1 to the text that SuperDVR & QSDT8PCRC Cards User Manual you want to appear here. 7.3.4 Image Zoom in/out When in single channel playback mode, the zoom control icons will appear. Select and click on the channel, it will zoom out the image. By clicking continuously, the image will be zoomed out continuously. Select and do the some operation to get the opposite effect.
Error! Use the Home tab to apply 标题 1 to the text that you want to appear here. Error! Use the Home tab to apply 标题 1 to the text that SuperDVR & QSDT8PCRC User Manual you want to appear here.
Error! Use the Home tab to apply SuperDVR & QSDT8PCRC Cards User Manual 标题 1 to the text that you want to appear here. Error! Use the Home tab to apply 标题 1 to the text that you want to appear here. 8 Remote Surveillance & Playback Remote Live Surveillance Surveillance system supports Remote Surveillance through LAN, Internet, and Intranet. Simply enable the Webcam function of the system on a computer which is connected to the Internet, and the computer system will become an Internet Webcam server.
Error! Use the Home tab to apply 标题 1 to the text that you want to appear here. Error! Use the Home tab to apply 标题 1 to the text that SuperDVR & QSDT8PCRC you want to appear here. User Manual higher quality setting. 8.2 Setting up Router for Internet Access To access the dvr card over the internet you would need to forward ports 80, 1159, and 1160 on the router that you have the PC with the DVR card installed attached to, to the IP address of the PC that has the card installed.
Error! Use the Home tab to apply SuperDVR & QSDT8PCRC Cards User Manual 标题 1 to the text that you want to appear here. Error! Use the Home tab to apply 标题 1 to the text that you want to appear here. Fig 7.2 ipconfig window 8.2.1 Port Forwarding To forward the ports you would need to access the router program by opening an internet browser and typing the default gateway address into the address bar and hitting enter.
Error! Use the Home tab to apply 标题 1 to the text that you want to appear here. Error! Use the Home tab to apply 标题 1 to the text that you want to appear here. SuperDVR & QSDT8PCRC User Manual Fig 7.4 Port Forward Default Guide link and it will give you instructions for your router. 8.2.
Error! Use the Home tab to apply SuperDVR & QSDT8PCRC Cards User Manual 标题 1 to the text that you want to appear here. Error! Use the Home tab to apply 标题 1 to the text that you want to appear here. 8.2.3 Dynamic Domain Name Services You can access the DVR card through Internet Explorer from a static or dynamic IP address; however a dynamic address can change from time to time. How often depends on your service provider. When it changes you need to go to back to a website such as www.myipaddress.
Error! Use the Home tab to apply 标题 1 to the text that you want to appear here. Error! Use the Home tab to apply 标题 1 to the text that SuperDVR & QSDT8PCRC User Manual you want to appear here. 7.6 Internet Explorer Tool Bar Fig 7.7 Internet Options Fig 7.8 Security Settings NOTICE: If you still cannot connect after enabling ActiveX, on many systems you many have another option.
Error! Use the Home tab to apply SuperDVR & QSDT8PCRC Cards User Manual 标题 1 to the text that you want to appear here. Error! Use the Home tab to apply 标题 1 to the text that you want to appear here. check for signatures on downloaded programs. To connect to the DVR from the remote computer you would then open an Internet Explorer browser window and enter the internet IP of your router that you got by going to www.myipaddress.com. 8.2.
Error! Use the Home tab to apply 标题 1 to the text that you want to appear here. Error! Use the Home tab to apply 标题 1 to the text that SuperDVR & QSDT8PCRC User Manual you want to appear here. Input the IP address of the computer with the card if accessing from LAN, or the public IP address of the router if accessing from the internet, into the Internet Explorer window to reach the window that prompts you to install the ActiveX control, then the following window appears: Fig 7.
Error! Use the Home tab to apply 标题 1 to the text that you want to appear here. Error! Use the Home tab to apply 标题 1 to the text that SuperDVR & QSDT8PCRC Cards User Manual you want to appear here. Fig 7.13 Webcam Main interface Feature Explanations: Icon Description Controls for PTZ Cameras: Move Up. Move Down. Move Left rotate left. Move Right. Stop Rotating. PTZ 'Focus' buttons. Click button 'Focus' farther away. Click button 'Focus' closer PTZ 'Zoom' buttons.
Error! Use the Home tab to apply 标题 1 to the text that you want to appear here. Error! Use the Home tab to apply 标题 1 to the text that SuperDVR & QSDT8PCRC User Manual you want to appear here.
Error! Use the Home tab to apply SuperDVR & QSDT8PCRC Cards User Manual 标题 1 to the text that you want to appear here. Error! Use the Home tab to apply 标题 1 to the text that you want to appear here. 8.4 Remote playback 8.4.1 Record playback and control Click button on the Webcam main interface, the remote playback interface will appear: Fig 7.14 Remote playback Explaination of the button functions: : Play/ Pause : Stop : Adjust the speed of playing back. Users can ajust play speed as needed.
Error! Use the Home tab to apply 标题 1 to the text that you want to appear here. Error! Use the Home tab to apply 标题 1 to the text that SuperDVR & QSDT8PCRC User Manual you want to appear here. ： ： ： ： Fig 7.15 Remote backup STEP1 Select the date, channel, then click Search button. It will list all files recorded for the day. STEP2 Click Browse button, set the saving path. STEP3 Select files in the search area.
Error! Use the Home tab to apply 标题 1 to the text that you want to appear here. Error! Use the Home tab to apply 标题 1 to the text that SuperDVR & QSDT8PCRC Cards User Manual you want to appear here. channel configuration window will appear: Fig 7.16 Channel configuration window for 1 channel playback mode Users can select one channel from all the available channels for playing back. Click , users can playback in four channel mode. Four channel configuration window will display as shown below: Fig7.
Error! Use the Home tab to apply 标题 1 to the text that you want to appear here. Error! Use the Home tab to apply 标题 1 to the text that SuperDVR & QSDT8PCRC User Manual you want to appear here. : Manual Record Events : Schedule Record Events : Motion Detection Record Events : Sensor Alarm Record Events The ruler on top of the bar shows the hours of the day. Right-click the ruler, it will be magnified 10 times allowing users to see the time marks more clearly.
Error! Use the Home tab to apply 标题 1 to the text that you want to appear here. Error! Use the Home tab to apply 标题 1 to the text that SuperDVR & QSDT8PCRC Cards User Manual you want to appear here. 8.5.1 Basic Configuration Fig 7.20 Basic setup 1. Caption There are four options: None, ID, Name and ID/Name to select from. ‘None’means no title or name. ‘ID’means camera numbers, i.e.1,2,3 and so on. ‘Name’means camera names,i.e.Cam1, Cam2 and so on.
Error! Use the Home tab to apply 标题 1 to the text that you want to appear here. Error! Use the Home tab to apply 标题 1 to the text that SuperDVR & QSDT8PCRC you want to appear here. User Manual The Alarm setup configuration is show below: Fig 7.22 Alarm triggering configuration Option Explanations: 1. Buzzer Users can select whether to sound the computer buzzer if the alarms have been triggered also select how long the buzzer sounds. 2.
Error! Use the Home tab to apply SuperDVR & QSDT8PCRC Cards User Manual 标题 1 to the text that you want to appear here. Error! Use the Home tab to apply 标题 1 to the text that you want to appear here. Fig 7.23 Camera setup configuration 1. Title Channel name. Users can set the channel name from Cam1, Cam2, Cam3 and Cam4. 2. Camera security Users are divided into two standards: normal user and super admin. By selecting this option, only administrator can see corresponding channels. 3.
Error! Use the Home tab to apply 标题 1 to the text that you want to appear here. Error! Use the Home tab to apply 标题 1 to the text that SuperDVR & QSDT8PCRC User Manual you want to appear here. Fig 7.24 Schedule configuration There are three kinds of recording modes: manual record, schedule record, motion detection/Sensor alarm record. Users can set schedules from Sunday to Monday separately for all of the three recording modes. Sensor alarm recording mode has the highest priority of the options.
Error! Use the Home tab to apply 标题 1 to the text that you want to appear here. Error! Use the Home tab to apply 标题 1 to the text that SuperDVR & QSDT8PCRC Cards User Manual you want to appear here. Enable buzzer on board for alarm 2. Auto mail When alarm is triggered, the system will send an email to users automatically. By clicking selected channel. , users can copy the setting of this channel to any other 8.5.
Error! Use the Home tab to apply 标题 1 to the text that you want to appear here. Error! Use the Home tab to apply 标题 1 to the text that SuperDVR & QSDT8PCRC User Manual you want to appear here. Users can use multiple cameras to record, every camera works separately and recorded files are also saved separately. a. Record quality There are five quality options to select from: lowest, lower, medium, higher and highest.
Error! Use the Home tab to apply 标题 1 to the text that you want to appear here. Error! Use the Home tab to apply 标题 1 to the text that SuperDVR & QSDT8PCRC Cards User Manual you want to appear here. Fig 7.29 Motion configuration Definition of the setup items: 1. Sensitivity Users can set motion detection sensitivity here. 2. Speed Motion detection speed 3. Block number Set grid’s number 4. Select all Select all the areas of the channel as detection area 5.
Error! Use the Home tab to apply 标题 1 to the text that you want to appear here. Error! Use the Home tab to apply 标题 1 to the text that SuperDVR & QSDT8PCRC User Manual you want to appear here. Fig 7.30 Email configuration 1. Mail server setup Fig 7.31 Mail server setup In this area, users can set receiver and sender’s E-mail SMTP server and address. Note: the address of receiver and sender can be the same. Relative Definitions: Smtp server: Sender’s SMTP, such as smtp.yahoo.
Error! Use the Home tab to apply 标题 1 to the text that you want to appear here. Error! Use the Home tab to apply 标题 1 to the text that SuperDVR & QSDT8PCRC Cards User Manual you want to appear here. Function Definitions: Send to: Receiver’s E-mail Address E-Mail from: Sender’s E-mail Address Subject: E-mail Subject Users can select‘Set Mail Internal’check box to set email send time, such as 5 seconds, 10 seconds and so on. 3. Attachment setup Fig 7.
Error! Use the Home tab to apply 标题 1 to the text that you want to appear here. Error! Use the Home tab to apply 标题 1 to the text that SuperDVR & QSDT8PCRC User Manual you want to appear here. 1. Protocol setup Fig 7.35 P.T.Z Protocol setup A. Protocol Communication protocol of P.T.Z device B. Port Users can set serial port number C. Address Communication address of P.T.Z device (ID number) 2. Serial port setup Users should first enable the P.T.
Error! Use the Home tab to apply 标题 1 to the text that you want to appear here. Error! Use the Home tab to apply 标题 1 to the text that SuperDVR & QSDT8PCRC Cards User Manual you want to appear here. Set P.T.Z device Baud rate, default value is 9600, used value must match Baud rate on PTZ control board C.Data bits Default value is 8, used value much match Baud rate on PTZ control board. D.Parity Odd and even parity bit, default Null, used value must match Baud rate on PTZ control board E.
Error! Use the Home tab to apply 标题 1 to the text that you want to appear here. Error! Use the Home tab to apply 标题 1 to the text that SuperDVR & QSDT8PCRC you want to appear here. 78 STEP3 ： Click on the software name. A dialog box will pop up. STEP4 ： Click “Yes” to download and install.
Error! Use the Home tab to apply SuperDVR & QSDT8PCRC Cards User Manual STEP5 标题 1 to the text that you want to appear here. Error! Use the Home tab to apply 标题 1 to the text that you want to appear here. ： PCam will be opened after installed. ： STEP6 Input the server’s address, ID, and password respectively in the columns of “Server”, “User”, and “Password”. Then click “Go” to login to the DVR. It will show the picture if accessed successfully. ： STEP7 Camera 1 is the default display after login.
Error! Use the Home tab to apply 标题 1 to the text that you want to appear here. Error! Use the Home tab to apply 标题 1 to the text that you want to appear here. SuperDVR & QSDT8PCRC User Manual Notice: User name and password here are the same as that used on the PC. The defaults are user name “SYSTEM” with no password. 8.8 By Smart Phone with Symbian Operating System Please use smart phones or PDAs with Symbian version supported by this unit.
Error! Use the Home tab to apply SuperDVR & QSDT8PCRC Cards User Manual 标题 1 to the text that you want to appear here. Error! Use the Home tab to apply 标题 1 to the text that you want to appear here. ： STEP4 The security window will pop up after downloaded and ask if you want to install the package. Click YES to install. STEP5 ： A Scam shortcut icon appears on the system menu after finished. STEP6 ： Run Scam program.
Error! Use the Home tab to apply 标题 1 to the text that you want to appear here. Error! Use the Home tab to apply 标题 1 to the text that SuperDVR & QSDT8PCRC you want to appear here. STEP7 User Manual ： Click Options--->Settings to enter login interface. ： STEP8 Input the server’s address, ID and password respectively. Then click OK to login to the DVR. (See 4.1.
Error! Use the Home tab to apply SuperDVR & QSDT8PCRC Cards User Manual STEP9 标题 1 to the text that you want to appear here. Error! Use the Home tab to apply 标题 1 to the text that you want to appear here. ： It will show the camera after accessing successfully. Notice: User name and password here are the same with that used on the PC.
Error! Use the Home tab to apply 标题 1 to the text that you want to appear here. Error! Use the Home tab to apply 标题 1 to the text that you want to appear here. SuperDVR & QSDT8PCRC User Manual 8.9 Accessing From iPhones At present, the software only supports iPhone os2.2 and above, if phone firmware is lower than this version please upgrade it.
Error! Use the Home tab to apply SuperDVR & QSDT8PCRC Cards User Manual 标题 1 to the text that you want to appear here. Error! Use the Home tab to apply 标题 1 to the text that you want to appear here. Step 4: Enter into iTunes Store password, click “OK” the below interface will display. Note: if this is the first time the user is using this feature you will need to enter user ID; if there is no Store account, user need to apply for one. Step 5: Download and install.
Error! Use the Home tab to apply 标题 1 to the text that you want to appear here. Error! Use the Home tab to apply 标题 1 to the text that SuperDVR & QSDT8PCRC User Manual you want to appear here. Step 6: Click “System setting”, to enter into login interface. Enter server’s IP address (or domain name), user’s ID and password. Click Back to save. Step 7: Click Live View, the default Cam1 picture will be displayed. Click to capture picture. Click 86 to enter PTZ mode.
Error! Use the Home tab to apply 标题 1 to the text that you want to appear here. Error! Use the Home tab to apply 标题 1 to the text that SuperDVR & QSDT8PCRC Cards User Manual you want to appear here. Step 8: On function interface, click Image View to view the captured picture. Click or to switch to next or previous picture. Click current picture.
Error! Use the Home tab to apply 标题 1 to the text that you want to appear here. Error! Use the Home tab to apply 标题 1 to the text that SuperDVR & QSDT8PCRC User Manual you want to appear here. Live View After successfully installing SuperCam software, Click on System Setting (Pic 1), and then enter Server IP address or Domain, User name and password to log in (Pic 2).
Error! Use the Home tab to apply 标题 1 to the text that you want to appear here. Error! Use the Home tab to apply 标题 1 to the text that SuperDVR & QSDT8PCRC Cards you want to appear here. Frequently Asked Questions User Manual Pic 5 Pic 6 1. : Previous picture 2. : Next Picture 3. : The first Picture 4. : The last picture 5. : Delete 6.
Appendix1 Frequently Asked SuperDVR & H.264 Series Cards Questions User Manual Appendix1 Frequently Asked Questions Appendix 2.1 Installation Appendix 2.1.1 Cannot Install the SuperDVR Driver Possible causes: • H.264 series capture card has not been installed. Before installing driver, users should install capture card hardware in the PCI slot in the computer case before installing the SuperDVR program. • H.264 series capture card has not been installed correctly.
SuperDVR & H.264 Series Cards User Manual Appendix1 Frequently Asked Questions Appendix 2.2.3 How to set recycling record mode on the system Select ‘Recycle’ in basic configuration, refer to Figure5-1. Users can select the percent of used disk space to set up “disk shortage alarm.” You can input percent manually or choose the selectable options such as, 25%, 50%, and 75% to set up. For example, if selecting 50%, an alarm will warn you when your disk space usage reaches 50%.
Appendix1 Frequently Asked Questions SuperDVR & H.264 Series Cards User Manual Appendix 2.3 How to Use Network Function Appendix 2.3.1 How to monitor on the client-side First enable ‘Web cameras service’ in basic configuration (refer to Figure5-1). Input the server Internet address in IE browser on the client-side, and the necessary webcam driver will be downloaded automatically, then users need to install the driver.
SuperDVR & H.264 Series Cards Appendix1 Frequently Asked Questions User Manual Appendix 2.3.5 What should I do if the Internet speed is quite slow? The more channels opened, and the slower the video transmission speed, therefore try to use one channel display mode when the network speed is slow. TIP There may be some surplus channels that have no video input. Switching off the channels will help to improve transmission speed. (Refer to ‘5.1 Basic Configuration’ about switching on/off channels.
Appendix1 Frequently Asked SuperDVR & H.264 Series Cards Questions 30fps User Manual 640*480 lowest 10.92 Appendix 2.4 Other Questions Appendix 2.4.1 Why doesn’t the computer display work, or why can’t I access Window system? The capture card may not be well installed. Unplug the card and try it again. NOTICE: Please unplug the power plug of the computer before re-installing the card to avoid damaging the motherboard chip set. Appendix 2.4.
SuperDVR & H.264 Series Cards User Manual Appendix1 Frequently Asked Questions Appendix 2.4.5 Why can’t I play back? Windows Media Player has been damaged, or decoder has not been installed properly. It is suggested you reinstall the player program or download a codec pack from K-lite (http://www.free-codecs.com/download/K_lite_codec_pack.htm) or www.divx.com. Computer problem, recorded files have been damaged. It is suggested to fix these files using SuperAVIFix program. Appendix 2.4.
SuperDVR & H.264 Series Cards Appendix2 Quick Start for Using User Manual Appendix 2.4.9 If system time must be changed, please do following preparations first 1. If new time is later than current computer time (for example, change 2006/01/01 0：0：0 (current system time) to 2007/01/01 0：0：0 (target time)), the change can be made directly. 2.
SuperDVR & H.264 Series Cards Appendix2 Quick Start for Using User Manual Appendix 3.2 Troubleshooting Appendix3.2.1 When opening the SuperDVR program, it says ‘ Can’t find card ’. Reboot one more time. If you still have the same problem, click ‘Start Program - SuperDVR - Install’ and then uninstall the program. Reboot the computer. After reboot, go back to ‘Start - Program - SuperDVR - Install’. Now click on ‘Install’ to reinstall driver. Then Reboot.
SuperDVR & H.264 Series Cards Appendix2 Quick Start for Using ： ： User Manual unsigned ActiveX controls’ (see section 7.2.4). STEP3 In the IE textbox of the Internet explorer, input the router’s Public IP (see section 7.2.2). STEP4 Select ‘Live Surveillance’ and click ‘OK’ on displayed page. This will download the Webcam program. And then you can download Remote Playback as well. STEP5 On Desktop now you should see ‘Webcam’ and ‘Remote Playback’ icon. STEP6 Open up Webcam, click ‘Key’ symbol icon.
SuperDVR & H.264 Series Cards Appendix3 Function Tree User Manual Appendix3 Function Tree Appendix 4.
SuperDVR & H.264 Series Cards Appendix3 Function Tree User Manual Appendix 4.
SuperDVR & H.264 Series Cards Appendix3 Function Tree User Manual Appendix 4.
SuperDVR & H.264 Series Cards Appendix3 Function Tree User Manual Appendix 4.
SuperDVR & H.264 Series Cards Appendix3 Function Tree User Manual 9 Q-See Product Warranty Thank you for choosing our products. All of our products users have a conditional free warranty repair service for hardware within 12 months starting from purchase date, and a free exchange service within one month (valid for manufacturing defects). Permanent upgrading service is provided for the software.
SuperDVR & H.264 Series Cards Appendix3 Function Tree User Manual Customer Information Card User’s Name Mr./Mrs. Company Name Postal Address Postal code Phone Number E-mail Model Number of Product Serial Number of Product Purchase Date Distributor The material in this document is the intellectual property of our company. No part of this manual may be reproduced, copied, translated, transmitted, or published in any form or by any means without our company’s prior written permission. 1.
